截止至2026年2月，在Int. J. Plast、Scripta Mater.等高水平期刊发表论文80余篇，总引用1400余次(h指数23)，其中第一作者/通讯作者论文4篇。

[1]      S. He, Y. Zeng*, M. Huang, R. Ni, Y. Zhang, B. Jiang, D. Yin*, Mapping precipitate-slip/twin interactions in Mg-Sn alloys: Insights from strain partitioning via HRDIC-EBSD multimodal analysis, Scripta Materialia 277 (2026) 117227.

[2]      Y. Zhang, M. Huang, H. Zhao, Z. Liu, X. Qian, L. Fan, Y. Zeng*, Semiquantitative Correlation of Precipitates and Twin in Mg–5Sn Alloy Under the Alternant Compression and Aging, Metallurgical and Materials Transactions A 57(2) (2026) 668–681.

 [3]      N.B. Zhang, W.Z. Wang, L. Lu, K. Li, K. Yang, T. Yang, X.J. Zhao*, Y. Zeng*, S.N. Luo, High strain rate deformation and spall damage in a Mg-Ag-Nd-Zr alloy: Effects of δ/γ precipitates, J. Magn. Alloy 35 (2025) 1758.

[4]      X. Zheng, R. Ni, Z. Jiang, H. Zhou, Y. Zeng*, D. Yin*, Tension-compression asymmetry and the grain-scale slip behavior in untextured Mg-10Gd-3Y-0.5Zr (wt.%), Mat Sci Eng A 920 (2025) 147533.

[5]      R. Fu, Y. Zeng*, Y. Wan, X. Qian, S. Xu, D. Yin, Quantitatively regulated and recognized dual-precipitates of Mg-5Sn alloy through an improved twinning-aging-detwinning and strengthening mechanisms, Journal of Magnesium and Alloys 13(7) (2025) 3252–3270.

[6]      T. Cheng, Y. Zeng*, Z. Cui, L. Fan, S. Li, J. Miao, S. Xu, M. Liu, Preparation of nanoprecipitates and ultrafine grains for WE43 alloy to enhance mechanical properties by pre-aging treatment prior to extrusion, Journal of Alloys and Compounds 1013 (2025) 178607.

[7]      S. Li, Y. Zeng*, L. Fan, Y. Song, R. Fu, T. Cheng, B. Jiang, Optimizing strength through tailored lamellar heterogeneous structures in Mg-5Y-1Sn alloys using gradient extrusion, Materials Science and Engineering: A 923 (2025) 147695.

[8]      T. Wei, X. Qian*, K. Sun, S. Xu, R. Pan, J. Mao, Y. Zeng*. The dynamic recrystallization and elevated-temperature work hardening behavior of Mg-Y-Sn alloys. Journal of Alloys and Compounds, 1024 (2025) 180097.

[9]      L. Fan, Y. Xiong, Y. Zeng*, R. Ni, Y. Zhang, L. Ren, H. Dieringa, Y. Huang, G. Quan, X. Zhang*, The strength-ductility synergy of magnesium matrix nanocomposite achieved by a dual-heterostructure, Journal Of Materials Science & Technology 215 (2025) 296-314.

[10]    S.J. Huang, R. Ni, Y.F. Wan, H. Zhou, Y. Zeng*, D.D. Yin*, Statistical analysis of anomalous tension twin and twin transmission in pure Mg sheet for various grain sizes and strain rates, Transactions of Nonferrous Metals Society of China 35(6) (2025) 1758–1771.

[11]    X. Qian, B. An*, R. Pan, D. Yan, Y. Zeng*, Tensile nanomechanics and dislocation characteristics of size-variational heterogeneous magnesium at 300 K and 600 K, Materials Letters 395 (2025) 138638.

[12]    H. Fu, X. Qian*, S. Xu, B. An, R. Pan, B. Jiang, Y. Zeng*, Room- and elevated-temperature strength of as-cast Mg–Sn–Y alloys mediated by Sn and Y solubility via intrinsic stability and deformation resistance, Journal of Materials Research and Technology 33 (2024) 6633.

[13]    R.H. Fu, Y.J. Wan, X.F. Xiong, D.D. Yin, M.P. Liu, B. Jiang, Z.R. Zhou, Y.Y. Gao*, Y. Zeng*, Twinning behaviors of Mg−Sn alloy with basal or prismatic Mg2Sn, Transactions Of Nonferrous Metals Society Of China 34(9) (2024) 2800.

[14]    R. Ni, C.J. Boehlert, Y. Zeng*, B. Chen, S. Huang, J. Zheng, H. Zhou, Q. Wang, D. Yin*, Automated analysis framework of strain partitioning and deformation mechanisms via multimodal fusion and computer vision, International Journal of Plasticity 182 (2024) 104119.

[15]    R. Ni, S. Hua, S. Huang, Y. Zeng*, Y. Chai, H. Zhou, J. Zheng, D. Yin*, Effect of grain size on tensile behavior and the underlying deformation modes in a Mg-5Y sheet, Journal of Alloys and Compounds 1008 (2024) 176570.

[16]    L. Fan, M. Zhou, W. Lao, Y. Zhang, H. Dieringa, Y. Zeng*, Y. Huang, G. Quan*, Improving the ductility and toughness of nano-TiC/AZ61 composite by optimizing bimodal grain microstructure via extrusion speed, Journal of Magnesium and Alloys 12(8) (2024) 3264.

[17]    X. Xiong, Y. Zeng*, R. Fu, M. Liu, B. Jiang, The quantitative regulation of basal and prismatic Mg2Sn to strengthen Mg-Sn alloys, Journal Of Alloys and Compounds 997 (2024) 174615.

[18]    李博超, 范玲玲, 崔壮, 付瑞豪, 李舒鹏, 刘满平, 蒋斌, 曾迎*, 异构镁制备及强韧化机理的研究现状, 中国有色金属学报 34(7) (2024) 2147-2172.

[19]    M. Huang, Y. Zeng*, X. Xiong, R. Fu, S. Li, X. Qian, B. Jiang, Effect of pre-compression deformation on aging precipitation behavior and mechanical properties of Mg–5Sn alloy, Journal of Materials Research and Technology 27 (2023) 7645-7655.

[20]    Ying Zeng, Xunfei Xiong, Xiaoying Qian, Dabiao Xia*, Xin Shang, Bin Jian, Dongdi Yin*. Achieving improved/reversed tension-compression asymmetry by tailoring extrusion processing for Mg-Sn(-Y) alloy. Metals Materials International 9 (2023) 885-895.

[21]    L. Fan, M. Zhou, Y. Zhang, H. Dieringa, X. Qian, Y. Zeng*, X. Lu, Y. Huang, G. Quan*, Achieving high strength and ductility in a heterogeneous bimodal grain structured TiC/AZ61 magnesium nanocomposites via powder metallurgy, Materials Science and Engineering: A 867 (2023) 144344.

[22]    D. Yin, S. Li, K. Sun, R. Fu, Y. Zhang, B. Jiang, Y. Huang, Y. Zeng*, Superior elevated-temperature strength of Mg-Y-Sn alloys with thermostable multi-scale precipitates and grain structure, Materials Science and Engineering: A 852 (2022) 143643 .

[23]    Y. Zeng*, K. Sun, X. Qian, A. Davis, Y. Yuan, B. Jiang, Y. Huang, D. Yin*, Achieving advanced elevated-temperature strength by tailoring precipitates in Mg-Sn-Y alloys, Journal of Alloys and Compounds 924 (2022) 166644.

[24]    Y. Zeng, Q. Hu, M. Pan, K. Zhang, S. Grasso, C. Hu, Q. Feng *, Investigation of double perovskites Sr2SmNbO6 and X2CoNbO6 (X=Sr,Ba) with SCAN functional and plus U correction, Advanced Powder Materials 1(2) (2022) 100019.

[25]    Y.J. Wan, Y. Zeng*, Y.C. Dou*, D.C. Hu, X.Y. Qian, Q. Zeng, K.X. Sun, G.F. Quan, Improved mechanical properties and strengthening mechanism with the altered precipitate orientation in magnesium alloys, Journal of Magnesium and Alloys 10(5) (2022) 1256–1267.

[26]    Xiaoying Qian, Ying Zeng*, Alec Davis, Qiurong Yang, Yangjie Wan, Bin Jiang, Intrinsic mechanical and interfacial characteristics of precipitates contributing to the room and elevated temperature strength in Mg–Sn–Y alloys , Journal of Materials Research and Technology, 15 (2021) 3928-3941.

[27]    Y.J. Wan, Y. Zeng *, Q. Zeng, B. Song, B. Jiang, Simultaneously improved strength and toughness of a Mg-Sn alloy through abundant prismatic lath-shaped precipitates , Materials Science and Engineering A, 811 (2021) 141087.

[28]    万杨杰, 钱晓英, 曾迎*, 孙可欣, 张英波, 权高峰. Al-Zn-Mg合金的相图计算及电子结构与力学性能的第一性原理计算. 材料导报, 2021, 35(2): 2139-2144.

[29]    K.X. Sun, Y. Zeng*, D.D. Yin*, F. Gao, L.J. Long, X.Y. Qian, Y.J. Wan, G.F. Quan and B. Jiang: Quantitative study on slip/twinning activity and theoretical critical shear strength of Mg alloy with Y addition. Materials Science and Engineering: A, 792, (2020)  139801     

[30]    Y. Wan, Y. Zeng*, X. Qian, Q. Yang, B. Jiang, First-principles calculations of structural, elastic and electronic properties of second phases and solid solutions in Ti–Al–V alloys, Physica B Condensed Matter, (2020) 412241.

[31]    X.Y. Qian, Y. Zeng*, B. Jiang, Q.R. Yang, Y.J. Wan, G.F. Quan, F.S. Pan, Grain refinement mechanism and improved mechanical properties in Mg–Sn alloy with trace Y addition . Journal of Alloys and Compounds, 820 (2020) 153122.

[32]    杨秋荣,曾迎*,周明扬,黄广号,任凌宝,陆嘉伟,尹冬弟,蒋斌.微量Y(0.2 wt.%)对铸造Mg-Sn合金热变形行为影响.稀有金属材料与工程,2019,48(7):2275~2283.[Yang Qiurong,Zeng Ying,Zhou Mingyang,Huang Guanghao,Ren Lingbao,Lu Jiawei,Yin Dongdi,Jiang Bin.Effect of Yttrium Addition (0.2 wt.%) on the Hot Compression Behavior of the As-cast Mg-Sn Alloy.Rare Metal Materials and Engineering,2019,48(7):2275~2283.]

[33]    XiaoYing Qian, Ying Zeng*, Bin Jiang, Yucheng Dou, Ouling Shi , Gaofeng Quan, Fusheng Pan. Study on mechanical behaviors and theoretical critical shear strength of cold-rolled AZ31 alloy with different Li additions. Materials Science and Engineering: A, 742 (2019) 241-254.

[34]    Ying Zeng*, Ouling Shi, Bin Jiang*, Gaofeng Quan, Fusheng Pan. Improved formability with theoretical critical shear strength transforming in Mg alloys with Sn addition. Journal of Alloys and Compounds, 764 (2018) 555-564.

[35]    Ying Zeng*, Bin Jiang*, Ouling Shi, Gaofen Quan, Salih Al-Ezzi, FuSheng Pan, First Principle and Experimental Study for Site Preferences of Formability Improved Alloying Elements in Mg Crystal. Metals and Materials International, 24 (2018) 830-839.   

[36]    Ying Zeng, Bin Jiang*, Qiurong Yang, Gaofeng Quan, Junjie He, Fusheng Pan. Effect of Li content on microstructure, texture and mechanical behaviors of the as-extruded Mg-Li sheets. Materials Science and Engineering: A, 2017, 700: 59-65.  

[37]    Ying Zeng, Bin Jiang*, Ruihong Li, Hengmei Yin, Salih Al-Ezzi. Grain Refinement Mechanism of the As-Cast and As-Extruded Mg–14Li Alloys with Al or Sn Addition. Metals, 2017,7:172            

[38]    Ying Zeng, Bin Jiang*, Ruihong Li, Junjie He, Xiangsheng Xia, Fusheng Pan. Effect of Li content on microstructure, texture and mechanical properties of cold rolled Mg–3Al–1Zn alloy. Materials Science and Engineering: A, 2015, 631: 189-195.

[39]    Ying Zeng, Bin Jiang*, Mingxing Zhang, Hengmei Yin, Ruihong Li, Fusheng Pan. Effect of Mg24Y5 intermetallic particles on grain refinement of Mg-9Li alloy, Intermetallics, 45 (2014) 18-23.   

[40]    Ying Zeng, Bin Jiang*, Dehui Huang, Jiahong Dai, Fusheng Pan. Effect of Ca addition on grain refinement of Mg–9Li–1Al alloy, Journal of Magnesium and Alloys, 1 (2013) 297-302.

近年来（2020年至今），主持国家自然科学基金青年项目1项、面上项目1项、四川省级项目等。

1. 国家自然科学基金面上项目，52374405，异构耐热镁合金多尺度析出相与混晶的组织稳定性和高温强化机理，2024/01-2027/12，主持；

2. 国家自然科学基金青年项目，52004227，孪生-析出-去孪生调控Mg-Sn合金析出相取向及其强韧化机制研究，2021/01-2023/12，主持；

3. 四川省重点研发项目-省院省校科技合作，2025YFHZ0055, 航天航空用镁合金低温滑移孪生竞争行为与强塑性响应机制研究，2025-01-01-2026-12-31，主持；

4. 四川省国际科技合作与交流研发项目，2023YFH0062，新型耐热镁合金的开发及其高温强化关键技术研究，2023/01-2024/12，主持

5. 四川省国际科技合作与交流研发项目，2018HH0026，Sn3Y5在变形镁合金中的晶粒细化机制及强韧性调控关键技术研究，2018/01-2020/12，主持

6. 国家重点实验室开放课题，Q110824Q02001，汽车动力系统耐热轻量化合金设计及高温强化机制，2024.01-2025.12，主持

7. 兰州交通大学-西南交通大学联合创新基金项目，2682024ZTZ007，异构耐热镁合金变形理论及高温力学性能研究，2025.01-2026.12，主持

8. 中央高校-新型交叉学科培育基金，2682022KJ039，多级亚结构镁合金变形理论及高温力学性能研究，2023/01-2024/12，主持；

9. 航空军工项目，R110825JG022，基于E2EM的-Zr、Ti、Zr-Ti相与Mg的晶体学匹配关系计算，2025.06-2025.12，主持

10. 中车长春轨道客车股份有限公司（重大工程横向），基于既有高铁线路运用边界的时速400公里动车组关键技术研究及产品研制项目整车及关键系统部件轻量化技术. 9600009007. 2021/12-2023/12，主研（4/30） 

长期从事轻量化合金材料（包括镁、钛、铝等）微观相结构调控及力学行为/性能的研究。擅长利用多尺度方法（宏观-力学性能、微观-析出相-滑移孪生、原子-第一性原理计算）研究金属材料组织与性能的关联性，在合金设计与开发方面具有丰富的经验。

暂无内容