截止至2026年2月，在Int. J. Plast、Scripta Mater.等高水平期刊发表论文80余篇，总引用1400余次(h指数23)，其中第一作者/通讯作者论文4篇。

[1]      S. He, Y. Zeng*, M. Huang, R. Ni, Y. Zhang, B. Jiang, D. Yin*, Mapping precipitate-slip/twin interactions in Mg-Sn alloys: Insights from strain partitioning via HRDIC-EBSD multimodal analysis, Scripta Materialia 277 (2026) 117227.

[2]      Y. Zhang, M. Huang, H. Zhao, Z. Liu, X. Qian, L. Fan, Y. Zeng*, Semiquantitative Correlation of Precipitates and Twin in Mg–5Sn Alloy Under the Alternant Compression and Aging, Metallurgical and Materials Transactions A 57(2) (2026) 668–681.

 [3]      N.B. Zhang, W.Z. Wang, L. Lu, K. Li, K. Yang, T. Yang, X.J. Zhao*, Y. Zeng*, S.N. Luo, High strain rate deformation and spall damage in a Mg-Ag-Nd-Zr alloy: Effects of δ/γ precipitates, J. Magn. Alloy 35 (2025) 1758.

[4]      X. Zheng, R. Ni, Z. Jiang, H. Zhou, Y. Zeng*, D. Yin*, Tension-compression asymmetry and the grain-scale slip behavior in untextured Mg-10Gd-3Y-0.5Zr (wt.%), Mat Sci Eng A 920 (2025) 147533.

[5]      R. Fu, Y. Zeng*, Y. Wan, X. Qian, S. Xu, D. Yin, Quantitatively regulated and recognized dual-precipitates of Mg-5Sn alloy through an improved twinning-aging-detwinning and strengthening mechanisms, Journal of Magnesium and Alloys 13(7) (2025) 3252–3270.

[6]      T. Cheng, Y. Zeng*, Z. Cui, L. Fan, S. Li, J. Miao, S. Xu, M. Liu, Preparation of nanoprecipitates and ultrafine grains for WE43 alloy to enhance mechanical properties by pre-aging treatment prior to extrusion, Journal of Alloys and Compounds 1013 (2025) 178607.

[7]      S. Li, Y. Zeng*, L. Fan, Y. Song, R. Fu, T. Cheng, B. Jiang, Optimizing strength through tailored lamellar heterogeneous structures in Mg-5Y-1Sn alloys using gradient extrusion, Materials Science and Engineering: A 923 (2025) 147695.

[8]      T. Wei, X. Qian*, K. Sun, S. Xu, R. Pan, J. Mao, Y. Zeng*. The dynamic recrystallization and elevated-temperature work hardening behavior of Mg-Y-Sn alloys. Journal of Alloys and Compounds, 1024 (2025) 180097.

[9]      L. Fan, Y. Xiong, Y. Zeng*, R. Ni, Y. Zhang, L. Ren, H. Dieringa, Y. Huang, G. Quan, X. Zhang*, The strength-ductility synergy of magnesium matrix nanocomposite achieved by a dual-heterostructure, Journal Of Materials Science & Technology 215 (2025) 296-314.

[10]    S.J. Huang, R. Ni, Y.F. Wan, H. Zhou, Y. Zeng*, D.D. Yin*, Statistical analysis of anomalous tension twin and twin transmission in pure Mg sheet for various grain sizes and strain rates, Transactions of Nonferrous Metals Society of China 35(6) (2025) 1758–1771.

[11]    X. Qian, B. An*, R. Pan, D. Yan, Y. Zeng*, Tensile nanomechanics and dislocation characteristics of size-variational heterogeneous magnesium at 300 K and 600 K, Materials Letters 395 (2025) 138638.

[12]    H. Fu, X. Qian*, S. Xu, B. An, R. Pan, B. Jiang, Y. Zeng*, Room- and elevated-temperature strength of as-cast Mg–Sn–Y alloys mediated by Sn and Y solubility via intrinsic stability and deformation resistance, Journal of Materials Research and Technology 33 (2024) 6633.

[13]    R.H. Fu, Y.J. Wan, X.F. Xiong, D.D. Yin, M.P. Liu, B. Jiang, Z.R. Zhou, Y.Y. Gao*, Y. Zeng*, Twinning behaviors of Mg−Sn alloy with basal or prismatic Mg2Sn, Transactions Of Nonferrous Metals Society Of China 34(9) (2024) 2800.

[14]    R. Ni, C.J. Boehlert, Y. Zeng*, B. Chen, S. Huang, J. Zheng, H. Zhou, Q. Wang, D. Yin*, Automated analysis framework of strain partitioning and deformation mechanisms via multimodal fusion and computer vision, International Journal of Plasticity 182 (2024) 104119.

[15]    R. Ni, S. Hua, S. Huang, Y. Zeng*, Y. Chai, H. Zhou, J. Zheng, D. Yin*, Effect of grain size on tensile behavior and the underlying deformation modes in a Mg-5Y sheet, Journal of Alloys and Compounds 1008 (2024) 176570.

[16]    L. Fan, M. Zhou, W. Lao, Y. Zhang, H. Dieringa, Y. Zeng*, Y. Huang, G. Quan*, Improving the ductility and toughness of nano-TiC/AZ61 composite by optimizing bimodal grain microstructure via extrusion speed, Journal of Magnesium and Alloys 12(8) (2024) 3264.

[17]    X. Xiong, Y. Zeng*, R. Fu, M. Liu, B. Jiang, The quantitative regulation of basal and prismatic Mg2Sn to strengthen Mg-Sn alloys, Journal Of Alloys and Compounds 997 (2024) 174615.

[18]    李博超, 范玲玲, 崔壮, 付瑞豪, 李舒鹏, 刘满平, 蒋斌, 曾迎*, 异构镁制备及强韧化机理的研究现状, 中国有色金属学报 34(7) (2024) 2147-2172.

[19]    M. Huang, Y. Zeng*, X. Xiong, R. Fu, S. Li, X. Qian, B. Jiang, Effect of pre-compression deformation on aging precipitation behavior and mechanical properties of Mg–5Sn alloy, Journal of Materials Research and Technology 27 (2023) 7645-7655.

[20]    Ying Zeng, Xunfei Xiong, Xiaoying Qian, Dabiao Xia*, Xin Shang, Bin Jian, Dongdi Yin*. Achieving improved/reversed tension-compression asymmetry by tailoring extrusion processing for Mg-Sn(-Y) alloy. Metals Materials International 9 (2023) 885-895.

[21]    L. Fan, M. Zhou, Y. Zhang, H. Dieringa, X. Qian, Y. Zeng*, X. Lu, Y. Huang, G. Quan*, Achieving high strength and ductility in a heterogeneous bimodal grain structured TiC/AZ61 magnesium nanocomposites via powder metallurgy, Materials Science and Engineering: A 867 (2023) 144344.

[22]    D. Yin, S. Li, K. Sun, R. Fu, Y. Zhang, B. Jiang, Y. Huang, Y. Zeng*, Superior elevated-temperature strength of Mg-Y-Sn alloys with thermostable multi-scale precipitates and grain structure, Materials Science and Engineering: A 852 (2022) 143643 .

[23]    Y. Zeng*, K. Sun, X. Qian, A. Davis, Y. Yuan, B. Jiang, Y. Huang, D. Yin*, Achieving advanced elevated-temperature strength by tailoring precipitates in Mg-Sn-Y alloys, Journal of Alloys and Compounds 924 (2022) 166644.

[24]    Y. Zeng, Q. Hu, M. Pan, K. Zhang, S. Grasso, C. Hu, Q. Feng *, Investigation of double perovskites Sr2SmNbO6 and X2CoNbO6 (X=Sr,Ba) with SCAN functional and plus U correction, Advanced Powder Materials 1(2) (2022) 100019.

[25]    Y.J. Wan, Y. Zeng*, Y.C. Dou*, D.C. Hu, X.Y. Qian, Q. Zeng, K.X. Sun, G.F. Quan, Improved mechanical properties and strengthening mechanism with the altered precipitate orientation in magnesium alloys, Journal of Magnesium and Alloys 10(5) (2022) 1256–1267.

[26]    Xiaoying Qian, Ying Zeng*, Alec Davis, Qiurong Yang, Yangjie Wan, Bin Jiang, Intrinsic mechanical and interfacial characteristics of precipitates contributing to the room and elevated temperature strength in Mg–Sn–Y alloys , Journal of Materials Research and Technology, 15 (2021) 3928-3941.

[27]    Y.J. Wan, Y. Zeng *, Q. Zeng, B. Song, B. Jiang, Simultaneously improved strength and toughness of a Mg-Sn alloy through abundant prismatic lath-shaped precipitates , Materials Science and Engineering A, 811 (2021) 141087.

[28]    万杨杰, 钱晓英, 曾迎*, 孙可欣, 张英波, 权高峰. Al-Zn-Mg合金的相图计算及电子结构与力学性能的第一性原理计算. 材料导报, 2021, 35(2): 2139-2144.

[29]    K.X. Sun, Y. Zeng*, D.D. Yin*, F. Gao, L.J. Long, X.Y. Qian, Y.J. Wan, G.F. Quan and B. Jiang: Quantitative study on slip/twinning activity and theoretical critical shear strength of Mg alloy with Y addition. Materials Science and Engineering: A, 792, (2020)  139801     

[30]    Y. Wan, Y. Zeng*, X. Qian, Q. Yang, B. Jiang, First-principles calculations of structural, elastic and electronic properties of second phases and solid solutions in Ti–Al–V alloys, Physica B Condensed Matter, (2020) 412241.

[31]    X.Y. Qian, Y. Zeng*, B. Jiang, Q.R. Yang, Y.J. Wan, G.F. Quan, F.S. Pan, Grain refinement mechanism and improved mechanical properties in Mg–Sn alloy with trace Y addition . Journal of Alloys and Compounds, 820 (2020) 153122.

[32]    杨秋荣,曾迎*,周明扬,黄广号,任凌宝,陆嘉伟,尹冬弟,蒋斌.微量Y(0.2 wt.%)对铸造Mg-Sn合金热变形行为影响.稀有金属材料与工程,2019,48(7):2275~2283.[Yang Qiurong,Zeng Ying,Zhou Mingyang,Huang Guanghao,Ren Lingbao,Lu Jiawei,Yin Dongdi,Jiang Bin.Effect of Yttrium Addition (0.2 wt.%) on the Hot Compression Behavior of the As-cast Mg-Sn Alloy.Rare Metal Materials and Engineering,2019,48(7):2275~2283.]

[33]    XiaoYing Qian, Ying Zeng*, Bin Jiang, Yucheng Dou, Ouling Shi , Gaofeng Quan, Fusheng Pan. Study on mechanical behaviors and theoretical critical shear strength of cold-rolled AZ31 alloy with different Li additions. Materials Science and Engineering: A, 742 (2019) 241-254.

[34]    Ying Zeng*, Ouling Shi, Bin Jiang*, Gaofeng Quan, Fusheng Pan. Improved formability with theoretical critical shear strength transforming in Mg alloys with Sn addition. Journal of Alloys and Compounds, 764 (2018) 555-564.

[35]    Ying Zeng*, Bin Jiang*, Ouling Shi, Gaofen Quan, Salih Al-Ezzi, FuSheng Pan, First Principle and Experimental Study for Site Preferences of Formability Improved Alloying Elements in Mg Crystal. Metals and Materials International, 24 (2018) 830-839.   

[36]    Ying Zeng, Bin Jiang*, Qiurong Yang, Gaofeng Quan, Junjie He, Fusheng Pan. Effect of Li content on microstructure, texture and mechanical behaviors of the as-extruded Mg-Li sheets. Materials Science and Engineering: A, 2017, 700: 59-65.  

[37]    Ying Zeng, Bin Jiang*, Ruihong Li, Hengmei Yin, Salih Al-Ezzi. Grain Refinement Mechanism of the As-Cast and As-Extruded Mg–14Li Alloys with Al or Sn Addition. Metals, 2017,7:172            

[38]    Ying Zeng, Bin Jiang*, Ruihong Li, Junjie He, Xiangsheng Xia, Fusheng Pan. Effect of Li content on microstructure, texture and mechanical properties of cold rolled Mg–3Al–1Zn alloy. Materials Science and Engineering: A, 2015, 631: 189-195.

[39]    Ying Zeng, Bin Jiang*, Mingxing Zhang, Hengmei Yin, Ruihong Li, Fusheng Pan. Effect of Mg24Y5 intermetallic particles on grain refinement of Mg-9Li alloy, Intermetallics, 45 (2014) 18-23.   

[40]    Ying Zeng, Bin Jiang*, Dehui Huang, Jiahong Dai, Fusheng Pan. Effect of Ca addition on grain refinement of Mg–9Li–1Al alloy, Journal of Magnesium and Alloys, 1 (2013) 297-302.