代表性学术论文

[1] Wang Jindong, Wu Zhanyang, Chen Yi, Xie Yuhong, Zhou Zhongrong. Efficiency Enhancement in Hammer Mills through Biomimetic Pigeon Wing Sieve Design [J]. Journal of Bionic Engineering, 2024.

[2] Wang Jindong, Yang Chenhao, Wu Zhanyang, et al. Method for robot kinematic parameters identification based on position and orientation data obtained with laser tracker[J]. Review of Scientific Instruments, Accepted.

[3] 王金栋,吴展杨,谢宇鸿.基于牛牙几何特征的仿生研磨副结构协同设计[J]. 机械工程学报, 2024.

[4] 赖洋,王金栋*,郭浩然,等.基于线激光测量的地铁受电弓磨耗在线检测方法[J]. 中国激光, 2023.

[5]王金栋,谢宇鸿,陈燚,吴展扬.基于河狸门齿的锤片式粉碎机锤片仿生设计[J]. 工程设计学报,2023. 

[6] Wang Jindong, Cheng Cong, Li Haitao. A novel approach to separate geometric error of the rotary axis of multi-axis machine tool using laser tracker [J]. International Journal of Precision Engineering and Manufacturing, 2020, 21: 983–993. (SCI)

[7] Wang Jindong, Cheng Cong, Chen Yi, Yang Dan, Zheng Jing, Zhou Zhongrong. Transfer of functional structures from multiple bovine teeth to a multilevel grinding head via a biomimetic approach [J]. Tribology International, 2020, 152: 106564. (SCI)

[8] Wang Jindong, Cheng Cong, Zeng Xiaotao, Zheng Jing, Zhou Zhongrong. Bionic-tribology design of tooth surface of grinding head based on the bovine molar [J]. Tribology International, 2020, 143: 106066. (SCI)

[9] Wang Jindong, Wang Qingjie, Li Haitao.  The Method of Geometric Error Measurement of NC Machine Tool Based on the Principle of Space Vector’s Direction Measurement[J], International Journal of Precision Engineering and Manufacturing, 2019, 20: 511-524. (SCI)

[10] Wang Jindong, Guo Junjie. The identification method of the relative position relationship between the rotary and linear axis of multi-axis numerical control machine tool by laser tracker[J], Measurement: Journal of the International Measurement Confederation, 2019, 132(1): 369-376. (SCI)

[11] Wang Jindong, Chen Peng, Deng Yufen, Guo Junjie. New algorithms for motion error detection of numerical control machine tool by laser tracking measurement on the basis of GPS principle[J], Review of Scientific Instruments, 2018, 89(1): 1-11. (SCI)

[12] Wang Jindong, Guo Junjie, Li Haitao, Deng Yufen, Lu Junfen. Research of omnidirectional measurement method to detect the errors of multi-axis numerical control machine tool based on laser tracker[J], IET Science, Measurement and Technology, 2018, 12(3): 418-425. (SCI)

[13] 王金栋, 孙荣康, 曾晓涛, 王庆杰. 激光跟踪多站分时测量基站布局研究[J], 中国激光, 2018, 45(4): 1-8.(EI)

[14] Wang Jindong, Guo Junjie, Research on the base station calibration of multi-station and time-sharing measurement based on hybrid genetic algorithm[J], Measurement, 2016, 94: 139-148.(SCI)

[15] Wang Jindong, Guo Junjie, Geometric error identification algorithm of numerical control machine tool using a laser tracker[J], Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2016, 230(11): 2004-2015.(SCI)

[16] Wang Jindong, Guo  Junjie, Zhang Guoxiong, Guo Bao'An, Wang Hongjian, The technical method of geometric error measurement for multi-axis NC machine tool by laser tracker[J], Measurement Science and Technology, 2012, 23(4): 1-11. (SCI)

[17] Wang Jindong, Guo Junjie, Zhou Baoqing, Xiao Jian, The detection of rotary axis of NC machine tool based on multi-station and time-sharing measurement[J], Measurement, 2012, 45(7): 1713-1722. (SCI)

[18] Wang Jindong, Guo Junjie, Research on volumetric error compensation for NC machine tool based on laser tracker measurement[J], Science China Technological Sciences, 2012, 55(11): 3000-3009. (EI)

[19] 王金栋, 郭俊杰, 费致根, 邓玉芬. 基于激光跟踪仪的数控机床几何误差辨识方法[J].机械工程学报, 2011, 47(14): 13-19. (EI)

                                                                                     授权发明专利

[1] 王金栋、曾晓涛、孙荣康. 多轴数控机床平动轴与旋转轴相互位置关系辨识方法，10636465 B，授权。

[2] 周仲荣、王金栋、成聪、郑靖. 一种基于牛磨牙天然摩擦副的多级磨头耦合仿生设计方法，110399673 B，授权。

[3] 周仲荣、王金栋、曾晓涛、郑靖、秦娜. 一种基于牛磨牙几何特征的胶体磨机磨头仿生设计方法，108345715 B，授权。

[1]  国家自然科学基金青年基金项目，51305370，基于激光跟踪测量原理的大型数控机床装配误差高效测量方法研究，主持；

[2]  中国博士后科学基金第57批面上项目，2015M572491，基于分时GPS测量原理的五轴数控机床几何误差测量方法，主持；

[3]  四川省重点研发项目，2021YFG0194，机器人六维位姿高效动态测量与精度提升方法研究，主持；

[4]  精密测试技术及仪器国家重点实验室（天津大学）开放基金，pilab1904，主持；

[5]  国家重点研发计划项目，2022YFB3401900，航空与核电装备复杂构件高性能制造理论与技术体系研究，子课题主持；

[6  西南交通大学“雏鹰计划”人才项目，主持；

[7] 西南交通大学学科交叉基础研究项目，川产半夏药材仿生高效粉碎及药性释放机理研究，主持；

[8] 横向课题：精密高速主轴轴承试验台测控系统的研究与设计，主持；

[9] 西安交通大学外协课题：回转类零件测量精度分析，主持；

[10]横向课题：车辆轮对核心算法模型研究，主持；

[11]  西南交通大学科技创新项目，2682017CX025，主持；

[12]  国家自然科学基金重点项目，51535010，若干典型动物牙齿的生物摩擦学机理研究，主研；

[13] “高档数控机床与基础制造装备”科技重大专项，2011ZX04016-101，汽车发动机关键零件高效高精度加工柔性自动线技术创新平台子课题，主研；

[14]  国家863项目，2008AA042404，复杂与大型齿轮测量系统，参研。

[1] 精密测量技术

[2] 制造基础装备（五轴数控机床、工业机器人等）精度检测及控制

[3] 轨道交通智能检测

[4] 摩擦学仿生设计与制造