代表性学术论文

[1] Wang Jindong, Wu Zhanyang, Chen Yi, Xie Yuhong, Zhou Zhongrong. Efficiency Enhancement in Hammer Mills through Biomimetic Pigeon Wing Sieve Design [J]. Journal of Bionic Engineering, 2024.

[2] Wang Jindong, Yang Chenhao, Wu Zhanyang, et al. Method for robot kinematic parameters identification based on position and orientation data obtained with laser tracker[J]. Review of Scientific Instruments, Accepted.

[3] 王金栋,吴展杨,谢宇鸿.基于牛牙几何特征的仿生研磨副结构协同设计[J]. 机械工程学报, 2024.

[4] 赖洋,王金栋*,郭浩然,等.基于线激光测量的地铁受电弓磨耗在线检测方法[J]. 中国激光, 2023.

[5]王金栋,谢宇鸿,陈燚,吴展扬.基于河狸门齿的锤片式粉碎机锤片仿生设计[J]. 工程设计学报,2023. 

[6] Wang Jindong, Cheng Cong, Li Haitao. A novel approach to separate geometric error of the rotary axis of multi-axis machine tool using laser tracker [J]. International Journal of Precision Engineering and Manufacturing, 2020, 21: 983–993. (SCI)

[7] Wang Jindong, Cheng Cong, Chen Yi, Yang Dan, Zheng Jing, Zhou Zhongrong. Transfer of functional structures from multiple bovine teeth to a multilevel grinding head via a biomimetic approach [J]. Tribology International, 2020, 152: 106564. (SCI)

[8] Wang Jindong, Cheng Cong, Zeng Xiaotao, Zheng Jing, Zhou Zhongrong. Bionic-tribology design of tooth surface of grinding head based on the bovine molar [J]. Tribology International, 2020, 143: 106066. (SCI)

[9] Wang Jindong, Wang Qingjie, Li Haitao.  The Method of Geometric Error Measurement of NC Machine Tool Based on the Principle of Space Vector’s Direction Measurement[J], International Journal of Precision Engineering and Manufacturing, 2019, 20: 511-524. (SCI)

[10] Wang Jindong, Guo Junjie. The identification method of the relative position relationship between the rotary and linear axis of multi-axis numerical control machine tool by laser tracker[J], Measurement: Journal of the International Measurement Confederation, 2019, 132(1): 369-376. (SCI)

[11] Wang Jindong, Chen Peng, Deng Yufen, Guo Junjie. New algorithms for motion error detection of numerical control machine tool by laser tracking measurement on the basis of GPS principle[J], Review of Scientific Instruments, 2018, 89(1): 1-11. (SCI)

[12] Wang Jindong, Guo Junjie, Li Haitao, Deng Yufen, Lu Junfen. Research of omnidirectional measurement method to detect the errors of multi-axis numerical control machine tool based on laser tracker[J], IET Science, Measurement and Technology, 2018, 12(3): 418-425. (SCI)

[13] 王金栋, 孙荣康, 曾晓涛, 王庆杰. 激光跟踪多站分时测量基站布局研究[J], 中国激光, 2018, 45(4): 1-8.(EI)

[14] Wang Jindong, Guo Junjie, Research on the base station calibration of multi-station and time-sharing measurement based on hybrid genetic algorithm[J], Measurement, 2016, 94: 139-148.(SCI)

[15] Wang Jindong, Guo Junjie, Geometric error identification algorithm of numerical control machine tool using a laser tracker[J], Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2016, 230(11): 2004-2015.(SCI)

[16] Wang Jindong, Guo  Junjie, Zhang Guoxiong, Guo Bao'An, Wang Hongjian, The technical method of geometric error measurement for multi-axis NC machine tool by laser tracker[J], Measurement Science and Technology, 2012, 23(4): 1-11. (SCI)

[17] Wang Jindong, Guo Junjie, Zhou Baoqing, Xiao Jian, The detection of rotary axis of NC machine tool based on multi-station and time-sharing measurement[J], Measurement, 2012, 45(7): 1713-1722. (SCI)

[18] Wang Jindong, Guo Junjie, Research on volumetric error compensation for NC machine tool based on laser tracker measurement[J], Science China Technological Sciences, 2012, 55(11): 3000-3009. (EI)

[19] 王金栋, 郭俊杰, 费致根, 邓玉芬. 基于激光跟踪仪的数控机床几何误差辨识方法[J].机械工程学报, 2011, 47(14): 13-19. (EI)

                                                                                     授权发明专利

[1] 王金栋、曾晓涛、孙荣康. 多轴数控机床平动轴与旋转轴相互位置关系辨识方法，10636465 B，授权。

[2] 周仲荣、王金栋、成聪、郑靖. 一种基于牛磨牙天然摩擦副的多级磨头耦合仿生设计方法，110399673 B，授权。

[3] 周仲荣、王金栋、曾晓涛、郑靖、秦娜. 一种基于牛磨牙几何特征的胶体磨机磨头仿生设计方法，108345715 B，授权。