[1] 国家自然科学基金(面上)：融合界面减阻与能量回收的耐久性超疏水表面构建及装置集成，2023.01-2026.12，主持

[2] 国家自然科学基金(优秀青年)：机械表面/界面科学，2019.01-2021.12，主研

[3] 国家自然科学基金(面上)：基于摩擦界面优化的低噪声高速列车盘形制动闸片的设计，2017.01-2020.12，主研
[4] 国家自然科学基金：生物活性对骨组织生物摩擦学特性的影响机理，2013.01-2015.12，主持
[5] 高等学校博士学科点专项科研基金：生物活性对人工骨生物摩擦学性能影响的研究，2013.01-2015.12，主持
[6] 中央高校基本科研业务费专项资金：残余生物活性对骨组织摩擦学特性影响及作用机理的研究，2011.01-2013.12，主持

第一作者/通讯作者论文:

• Shun Li, Yixian Hu, Pengcheng He,  Jiangpeng Qu, Jing Zhao*, Jiliang Mo, Zhiyong Fan. Enhanced performance of TENG through graphene oxide and transition layer coupling: Achieving green energy harvesting and powering wearable devices. Nano Energy, 2025, 133, 110436.         (IF:16.8)

  
  

• Wei Chen, Zhicheng He, Jing Zhao*, Jiliang Mo, Huajiang Ouyang. Hybrid triboelectric-piezoelectric energy harvesting via a bistable swing-impact structure with a tuneable potential barrier and frequency-up conversion effects. Applied Energy, 2024, 375, 124123.      (IF:10.1)

  

• Jing Zhao*, Chuang Liu, Zijin Cheng, Ruoyu Sun, Yixian Hu, Jiliang Mo. Efficient water-collection hybrid surface optimized through combination-hole arrangement and diversion groove structure design. Journal of Materials Chemistry A, 2024, 12, 23930-23939.      (IF:10.7)

  

• Jiangpeng Qu, Pengcheng He, Ruoyu Sun, Kaijun Huang, Jing Zhao*, Jiliang Mo. A laser-induced superhydrophobic surface with multiple microstructures for stable drag reduction. Surface & Coatings Technology, 2024, 490, 131181.    (IF:5.3)

  

• Pengcheng He, Jiangpeng Qu, Shun Li, Ruoyu Sun, Kaijun Huang, Jing Zhao*, Jiliang Mo. Study on the construction of durable superhydrophobic coatings using simple spray coating method and their underwater drag reduction performance. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2024, 701, 134858.    (IF:4.9)

• Ruoyu Sun, Chuang Liu, Jing Zhao*, Qiangqiang Sun*, Jiliang Mo, Zhongrong Zhou. Solar water evaporation-induced long-term locomotion of self-propelled soft robots. Nano Energy, 2024, 128, 109938.    (IF:16.8)

• Y.X. Hu, R.Y. Sun, S. Li, C. Liu, J. Zhao*, J.L. Mo, D.B. Luo, Y.J. Pan. Optimizing raindrop energy harvesting: exploring water droplet spreading effects on IDE-based TENG for sustainable power generation. Nano Energy, 2024, 123:109358.    (IF:17.6)

• C. Liu, R.Y. Sun, J. Zhao*, Y.X. Hu, J.L. Mo, Enhancement of water collection efficiency by optimizing hole size and ratio of hydrophilic-superhydrophobic area on hybrid surfaces. Journal of Environmental Chemical Engineering, 2023, 11:111082.    (IF:7.7)

• R.Y. Sun, J. Zhao*, J.L. Mo, N.K. Yu, Z.R. Zhou, Study of the drag reduction performance on steel spheres with superhydrophobic ER/ZnO coating. Materials Science & Engineering B, 2023, 288:116144.    (IF:3.407)

• J. Zhao*, R.Y. Sun, C. Liu, J.L. Mo, Application of ZnO/epoxy resin superhydrophobic coating for buoyancy enhancement and drag reduction. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2022, 651:129714.    (IF:5.518)         

• R.Y. Sun, J. Zhao*, C. Liu, N.K. Yu, J.L. Mo, Design and optimization of hybrid superhydrophobic–hydrophilic pattern surfaces for improving fog harvesting efficiency. Progress in Organic Coatings, 2022, 171:107016.    (IF:6.206)

• R.Y. Sun, Z. Li, J. Zhao*, J.L. Mo, Y.J. Pan, D.B. Luo, Facile fabrication of durable superhydrophobic aluminum alloy surfaces by HS-WEDM and chemical modification, Nano, 2021, 16:2150133.    (IF:1.438)                              

• R.Y. Sun, N.K. Yu, J. Zhao*, J.L. Mo, Y.J. Pan, D.B. Luo, Chemically stable superhydrophobic polyurethane sponge coated with ZnO/epoxy resin coating for effective oil/water separation, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2021, 611:125850.    (IF:5.518)   

• R.Y. Sun, J. Zhao*, Z. Li, N. Qin*, J.L. Mo, Y.J. Pan, D.B. Luo, Robust superhydrophobic aluminum surfaces with anti-icing ability, thermostability, and mechanical durability, Progress in Organic Coatings, 2020, 147:105745.    (IF:6.206)             

• R.Y. Sun, J. Zhao*, Z. Li, J.L. Mo, Y.J. Pan, D.B. Luo, Preparation of mechanically durable superhydrophobic aluminum surface by sandblasting and chemical modification, Progress in Organic Coatings, 2019, 133:77-84.    (IF:6.206)  

• X. Zhang, J. Zhao*, J.L. Mo, R.Y. Sun, Z.Li, Z.G. Guo, Fabrication of superhydrophobic aluminum surface by droplet etching and chemical modification, Colloids and Surfaces A-Physicochemical and Engineering Aspects, 2019, 567:205-212.    (IF:5.518)    

• 何泽栋, 赵婧*, 许博. 有机相对骨组织力学性能影响的有限元分析. 复合材料学报, 2018, 35(1): 238-243.  (EI)
  

• 何泽栋, 赵婧*, 陈亮宇, 李科, 翁杰. 水对骨组织生物摩擦学损伤多尺度的有限元分析. 中国组织工程研究, 2017, 21(7): 1041-1045.  (核心期刊)
  

• 陈亮宇, 赵婧*, 何泽栋, 李科, 翁杰. 水含量对骨组织生物摩擦学行为的影响. 生物医学工程学杂志, 2016, 33(3): 466-472. (EI)
  

• 赵婧, 李金雨, 智伟, 鲁雄, 贾治彬, 翁杰. 蜡球造孔法制备多孔HA陶瓷支架及其性能优化. 无机材料学报, 2013, 28(1): 74-78. (SCI)
  

• J. Zhao, K. Duan, J.W. Zhang, L.Y. Guo, J. Weng, Preparation of highly interconnected porous hydroxyapatite scaffolds by chitin gel-casting, Materials Science and Engineering C, 2011, 31:697-701. (IF: 5.08)
  

• J. Zhao, K. Duan, J.X. Wang, X. Lu, J. Weng, The influence of polymer concentrations on the structure and mechanical properties of porous HA/PCL composite tissue engineering scaffolds, Applied Surface Science, 2010, 256:4586-4590. (IF:4.439)
  

• J. Zhao, X. Lu, K. Duan, L.Y. Guo, S.B. Zhou, J. Weng, Improving mechanical and biological properties of macroporous HA scaffolds through composite coatings, Colloids and Interface B: Biointerface, 2009, 74:159-166. （IF: 3.997）)
  

• J. Zhao, X. Lu, J. Weng, Macroporous Ti-based composite scaffold prepared by polymer impregnating method with calcium phosphate coatings, Materials Letters, 2008, 62:2921-2924. (IF: 2.687)
  

• J. Zhao, L.Y. Guo, X.B. Yang, J. Weng, Preparation of bioactive porous HA/PCL composite scaffolds, Applied Surface Science, 2008, 255:2942-2946. (IF: 4.439)
  

• J. Zhao, S.G. Xiao, X. Lu, J.X. Wang, J. Weng, A study on improving mechanical properties of porous HA tissue engineering scaffolds by hot isostatic pressing, Biomedical Materials, 2006, 1:188–192. (IF: 2.897)
  

• J. Zhao, S.G. Xiao, J.X. Wang, J. Weng, The effect of particle morphologies on mechanical properties of porous hydroxyapatite scaffold, Key Engineering Materials, 2008,361-363:179-182. (EI)
  

• 赵婧，鲁雄，汪建新，翁杰. 具有生物活性的多孔钛金属复合支架的制备. 生物医学工程学杂志, 2009, 26(4): 795–798. (核心期刊)

非第一作者/通讯作者论文：

• X.D. Lu, J. Zhao, J.L. Mo*, Q. Zhang, X. Zhang, Z.R. Zhou. Improvement of dynamical and tribological properties of friction systems by introducing parallel-grooved structures in elastic damping components. Composite Structures, 2018, 192: 8-19.（IF: 4.101）
  

• Q. Zhang, J.L. Mo*, X.D. Lu, J. Zhao, D.W. Wang, Z.R. Zhou. Grooved-structure design for improved component damping ability. Tribology International, 2018, 123: 50-60.（IF: 3.246）
  

• Z.Y. Zhu, J.L. Mo*, D.W. Wang, J. Zhao, M.H. Zhu, Z.R. Zhou. Study on the correlation between dynamical behavior and friction/wear mechanism under the effect of grooves, Journal of Materials Engineering and Performance, 2018, DOI: 10.1007/s11665-018-3373-z. (IF: 1.340)
  

• 李科, 赵婧, 莫继良*, 罗健, 朱旻昊. 基于MATLAB和ABAQUS的接触网钢腕臂结构形状及尺寸优化. 铁道学报，2017.
  

• 李科, 莫继良*,罗健，赵婧, 朱旻昊. 预应力下接触网腕臂结构动态特性研究. 铁道科学与工程学报，2017，06：1294-1300.

研究方向：

(1) 减阻/能量回收

(2) 仿生制造

(3) 表面与界面/组织工程材料

(4) 机械设计理论

暂无内容