2019年

Wei LI, Liantao Lu,  Dongfang ZENG, The contribution of topography formed by fine particle peening process in reducing friction coefficient of gear steel, Tribology Transactions[J].(SCI,accepted)

Mingyuan Zhang, Dongfang Zeng, Liantao Lu, Yuanbin Zhang, Jingmang Xu. Finite element modeling and experimental validation of bolt loosening due to thread wear under transverse cyclic loading[J].Engineering Failure Analysis, 2019, 104:341-353.(SCI,https://doi.org/10.1016/j.engfailanal.2019.05.001)

    2018年

Zeng D,Zhang Y,Lu L,et al.Fretting wear and fatigue in press-fitted railway axle: A simulation study of the influence of stress relief groove[J]. International Journal of Fatigue, 2019, 118:225-236.(SCI,https://doi.org/10.1016/j.ijfatigue.2018.09.008)

Mingyuan Zhang, Dongfang Zeng, Zhanqiang Wang, Mingming Tang, Liantao Lu. Loosening evaluation of bolted joints modified by fineparticle bombardment under transverse cyclic loading, Tribology transactions.2018(SCI,http://doi.org/10.1080/10402004.2018.146069)

Mingyuan Zhang，Liantao Lu, Wenjian Wang, Dongfang Zeng. The Roles of Thread Wear on Self-loosening Behavior of Bolted Joints under Transverse Cyclic Loading. Wear, 2018, 394-395: 30-39 (SCI,http://dx.doi.org/10.1016/j.wear.2017.10.006)

Yuanbin Zhang，Liantao Lu, Lang Zou, Dongfang Zeng and Jiwang Zhang. Finite element simulation of the influence of fretting wear on fretting crack initiation in press-fitted shaft under rotating bending. Wear, 2018, 400–401: 177-183. (SCI,https://doi.org/10.1016/j.wear.2018.01.008)

张明远，鲁连涛，唐明明,等. 横向载荷作用下螺栓临界松动载荷数值计算方法研究[J], 机械工程学报，2018.54(5):173-178(EI ).

张明远，鲁连涛，唐明明,等. 螺纹面磨损对螺栓抗松动能力影响研究[J] 西南交通大学学报, 2018, 52(01).(EI ).

    2017年

Dongfang Zeng, Liantao Lu, Yanhua Gong,Yuanbin Zhang,Jiwang Zhang,Influence of solid solution strengthening on spalling behavior of railway wheel steel.Wear, 372, pp 158-168, 2017.2.15.(SCI,https://doi.org/10.1016/j.wear.2016.12.025)

Yuanbin Zhang, Liantao Lu, Yubin Gong, Jiwang Zhang, Dongfang Zeng. Fretting wear-induced evolution of surface damage in press-fitted shaft, Wear, 2017, 384-385: 131-141.(SCI,http://dx.doi.org/10.1016/j.wear.2017.05.014)

Yuanbin Zhang, Liantao Lu, Yubin Gong, Jiwang Zhang, Dongfang Zeng. Finite Element Modeling and Experimental Validation of Fretting Wear Scars in Press-Fitted Shaft with Open Zone, Tribology Transactions, 2017. (SCI,https://doi.org/10.1080/10402004.2017.1378395)

Dongfang Zeng, Liantao Lu, Ning Zhang, Yanhua Gong and Jiwang Zhang. Influence of hybrid treatment of fine particle bombarding and powder impact plating on scuffing behavior of ductile cast iron [J]. Wear, 2017, 372-373: 1-11. (SCI,https://doi.org/10.1016/j.wear.2016.11.019 )

Dongfang Zeng, Liantao Lu, Ning Zhang, Yuanbin Zhang and Jiwang Zhang. Investigation on the scuffing resistance of ductile cast iron as affected by fine particle bombardment to produce surface hardened layer and micro-dimpled surface, Wear, 2017, 378–379: 174-182. (SCI,https://doi.org/10.1016/j.wear.2017.02.046))

Dongfang Zeng, Liantao Lu, Ning Zhang, Yanhua Gong and Yuanbin Zhang. Scuffing behavior of Al-Si alloy modified by fine particle bombarding and powder impact plating hybrid surface treatment [J]. Tribology Transactions. 2017.(SCI,http://dx.doi.org/10.1080/10402004.2016.1261314))

张明远，鲁连涛, 曾东方, 陈刚, 张继旺. 滚动方向改变对车轮钢摩擦磨损性能的影响[J]. 西南交通大学学报, 2017, 52(1): 106-111,126. (EI)

宫昱滨，鲁连涛，张远彬，张继旺，曾东方.空心轴过盈配合结构循环微动磨损的仿真研究[J]. 机械工程学报, 2017. (EI ).

    2016年

Dongfang Zeng, Liantao Lu, Jiwang Zhang, Xuesong Jin and Minhao Zhu. Effect of micro-inclusions on subsurface-initiated rolling contact fatigue of a railway wheel [J]. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2016, 230(2): 544-53. (SCI)

Dongfang Zeng, Liantao Lu, Jiwang Zhang, Xuesong Jin and Minhao Zhu. Effect of bi-directional operation on rolling-sliding wear of wheel steel under variable amplitude loading. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 2016, 230(2): 186-95. (SCI)

Dongfang Zeng, Liantao Lu, Yanhua Gong,Ning Zhang and Yubin Gong. Optimization of strength and toughness of railway wheel steel by alloy design [J]. Materials & Design, 2016, 92: 998–1006. (SCI)

Dongfang Zeng, Liantao Lu, Ning Zhang, Yubin Gong and Jiwang Zhang. Effect of different strengthening methods on rolling/sliding wear of ferrite-pearlite steel [J]. Wear, 2016, 358:62-71. (SCI)

Dongfang Zeng, Liantao Lu and Jiwang Zhang. A method to rapidly and accurately evaluate the maximum inclusion size in medium strength steel [J]. Journal of Materials Research, 2016, 31(18): 2817-2824. (SCI)

Yuanbin Zhang, Liantao Lu. Influence of Fretting Wear on Initiation of Fretting Fatigue crack of Press-Fitted Shaft. 18th International Wheelset Congress, Chengdu, China, 7-11 November 2016. Prceedings of IWC 2016, 2016:176-180.

Ning Zhang, Zhang Jiwang,Liantao Lu,Mintang Zhang,Dongfang Zeng,Qingpeng Song. Wear and friction behavior of austempered ductile iron as railway wheel material. Materials & Design, 2016,89,815-822, .(SCI)

张远彬，鲁连涛, 宫昱滨, 曾东方.微动磨损对过盈配合微动疲劳性能的影响，摩擦学学报，2016, 36(4)：495-502.(EI)

    2015年

张远彬，鲁连涛，曾东方，张继旺。微动磨损对过盈配合结构微动参量的影响，摩擦学学报，2015, 35(4)：485-494.  (EI).

    2014年

Dongfang Zeng, Liantao Lu, Zhengyang Li, Jiwang Zhang, Xuesong Jin, Minhao Zhu. Influence of laser dispersed treatment on rolling contact wear and fatigue behavior of railway wheel steel [J]. Materials & Design, 2014, 54: 137-43. (SCI)

曾东方，鲁连涛，李正阳，张继旺，朱旻昊，金学松.激光离散处理车轮钢－钢轨钢摩擦副的摩擦学性能研究，摩擦学学报,2014,34(1):79-86.(EI).

张艳斌，鲁连涛，薛弼一.喷丸处理对6151-T6铝合金旋转弯曲疲劳性能的影响，材料工程,2014(04),73-78.(EI).

    2013年

J.W. Zhang, L.T. Lu, Y.B. Zhang, K. Shiozawa, W.H. Zhang. Inclusion size evaluation and fatigue strength analysis of 35CrMo alloy railway axle steel. Materials Science and Engineering A. 2013, 528:7060-7067. (SCI)

张远彬，鲁连涛，张继旺，邬平波，马纪军，王贵国，压装轴微动疲劳主裂纹萌生位置的分析，机械工程学报，2013,49（10）：90-96. （EI）

曾东方，鲁连涛，张远彬，张继旺，朱旻昊,金学松，高速轮轨材料匹配的滚动接触磨损性能，机械工程学报2013,49（13）：183-189. （EI）

    2012年

曾东方，鲁连涛等，张继旺，王文健，朱旻昊，徐志富，等温淬火球墨铸铁的滚动接触磨损性能研究，摩擦学学报, 2012,32(2):171-175.(EI）

曾东方，鲁连涛等，张远彬，张继旺，温泽峰，朱旻昊，合金含量对高速车轮材料滚动接触磨损性能的影响，摩擦学学报 2012,32(6):599-605.(EI）

曾东方, 鲁连涛, 张继旺等. 等温淬火球墨铸铁的滚动接触磨损性能研究 [J]. 摩擦学学报, 2012, 32(2): 171-175. （EI）.

    2011年

J.W.  Zhang, L.T. Lu, K. Shiozawa,  W.N.Zhou, W.H. Zhang. Effects of nitrocarburzing on fatigue property of medium  carbon steel in very high cycle regime. Materials Science and Engineering A,  2011, 528: 7060-7067. （SCI）.

J.W.  Zhang, L.T. Lu, K. Shiozawa,  X.L.Shen, H.F.Yi, W.H. Zhang. Analysis on fatigue property of microshot peened  railway axle steel. Materials Science and Engineering A, 2011, 528: 1615-1622. （SCI）.

J.W.  Zhang, L.T. Lu, K. W.N. Zhou,  X.L.Shen, H.F.Yi, W.H. Zhang. Effect of nitrocarburizing and post-oxidation on  fatigue behavior of 35CrMo alloy steel in very high cycle fatigue regime.  International Journal of Fatigue, 2011, 33: 880-886. （SCI）.

Yuuji  Shimatani, Kazuaki Shiozawa, Takehiro Nakada, Takashi Yoshimoto, Liantao Lu. The effect of the residual  stresses generated by surface finishing methods on the very high cycle fatigue  behavior of matrix HSS. International Journal of Fatigue, 2011, 33: 122-131. （SCI）.

Jiwang  Zhang, Liantao Lu, Guodong Cui,  Xunliang Shen, Hongfei Yi, Weihua Zhang.   Effect of gas oxynitrocarburizing on the  properties of medium carbon railway axle steel. Surface Engineering, 2011, 27:  498-503. （SCI）.

鲁连涛,张继旺, 崔国栋,沈训梁,张卫华.气体渗氮对中碳车轴钢超长寿命疲劳性能的 影响.北京科技大学学报，2011, 33(6): 709-714. （EI）.

    2010年

Jiwang  ZHANG, Liantao LU, Guodong CUI ,  Xunliang SHEN, Hongfei YI, Weihua ZHANG. Effect of process temperature on the  microstructure and properties of gas oxynitrocarburized 35CrMo alloy steel.  Materials & Design, 2010, 31: 2654-2658. （SCI）.

J.W.  Zhang, L.T. Lu, K. Shiozawa, G.D.  Cui, W.H. Zhang. Fatigue properties of oxynitrocarburized medium carbon railway  axle steel in very high cycle regime. International Journal of Fatigue, 2010,  32: 1805-1811. （SCI）.

张继旺, 鲁连涛, 张艳斌, 张卫华. 疲劳极限的小样本评估方法. 哈尔滨工程大学学报，2010, 31(3)：336-339. （EI）.

沈训梁，鲁连涛，姜洪峰，张继旺，衣鸿飞. 车轴钢小试样及实物车轴中夹杂物尺寸对疲劳强度影响的差异分析. 机械工程学报, 2010, 46(16): 48-52. （EI）.

    2009年

张继旺，鲁连涛，沈训梁，衣鸿飞，张卫华.基于塑性应变的变幅应力疲劳损伤评估方法. 金属学报, 2009, 45(12) : 1461-1465.（SCI）.

张继旺，鲁连涛，张卫华. 微粒子喷丸中碳钢疲劳性能分析. 金属学报,2009, 45 (11): 1378-1383.（SCI）.

鲁连涛，李伟，张继旺，盐泽和章，张卫华. GCr15钢旋转弯曲超长寿命疲劳性能分析. 金属学报，2009, 45(1): 73-78. （SCI）.

Lu, L. T., Zhang, J. W., Shiozawa, K. Influence of  inclusion size on S-N curve characteristics of high-strength steels in the  giga-cycle fatigue regime. Fatigue & Fracture of Engineering Materials  & Structures, 2009, 32: 647-655. （SCI）.

K.  Shiozawa, T. Hasegawa, Y. Kashiwagi, L.  Lu. Very high cycle fatigue properties of bearing steel under axial loading  condition. International Journal of Fatigue, 2009, 31: 880-888. SCI（SCI）.

鲁连涛，张继旺，张艳斌，植柏宇, 张卫华. LZ50车轴钢超长寿命旋转弯曲疲劳性能. 铁道学报，2009，31(5): 37-41. （EI）.

    2008年

李伟，李强，鲁连涛，谢基龙.GCr15钢超高周的疲劳行为. 北京交通大学学报,  2008(04),24-27+32.（EI）.

李伟，李强，鲁连涛，王平.不同加载频率下GCr15钢超高周疲劳行为的研究. 材料热处理学报,  2008(06),53-57.（EI）.

    2007年

鲁连涛,盐泽和章，西野精一.研磨加工层对高碳铬轴承钢超长寿命疲劳行为的影响. 机械工程学报,  2007(02),115-121.（EI）.

    2006年

李伟,鲁连涛.高碳铬轴承钢超长寿命S-N关系的概率特性. 交通运输工程学报,  2006(02),17-21.（EI）.

鲁连涛,盐泽和章.高速工具钢的超长寿命S-N曲线特征和内部裂纹萌生行为.机械工程学报,  2006(12),89-94.（EI）.

鲁连涛,盐泽和章,姜燕.深层滚压加工对高碳铬轴承钢超长寿命疲劳行为的影响.金属学报,  2006(15),515-520.（SCI）.

    2005年

鲁连涛,张卫华.高碳铬轴承钢的超长寿命疲劳行为的研究. 机械工程学报,  2005(10),143-148+152.（EI）.

鲁连涛,盐泽和章，森井佑一,西野精一.高碳铬轴承钢超长寿命疲劳破坏过程的研究.金属学报,  2005(10),60-66.（SCI）.

    2003年

魯連涛, 塩澤和章. 高速度工具鋼 SKH51 の超長寿命域の疲労挙動に及ぼす表面処理の影響 [J]. 日本機械学会論文集 A 編, 2003, 69(684): 1195-202. (002, 68(675): 1666-73.（SCI）.

魯連涛, 塩澤和章, 森井祐一. 高速度工具鋼 SKH 51 の超長寿命疲労挙動と破壊形態 [J]. 日本機械学会論文集 A 編, 2003, 69(679): 662-70.（SCI）.

    2002年

魯連涛, 塩澤和章. 高炭素クロム軸受鋼の超長寿命疲労挙動に及ぼす二段二重変動荷重の影響と内部き裂進展挙動 [J]. 日本機械学会論文集 A 編, 2002, 68(675): 1666-73.（SCI）.

SHIOZAWA K, LU L. Very high‐cycle fatigue behaviour of shotpeened high-carbon-chromium bearing steel [J]. Fatigue & Fracture of Engineering Materials & Structures, 2002, 25(8‐9): 813-22.（SCI）.

    2001年

魯連涛,  塩澤和章. 高炭素クロム軸受鋼の超長寿命疲労強度に及ぼすショットピーニングの影響 [J]. 日本機械学会論文集 A 編, 2001, 67(662): 1630-8.（SCI）.

SHIOZAWA K, LU L, ISHIHARA S. S–N curve characteristics and subsurface crack initiation behaviour in ultra‐long life fatigue of a high carbon‐chromium bearing steel [J]. Fatigue & Fracture of Engineering Materials & Structures, 2001, 24(12): 781-90.（SCI）.

LU L, SHIOZAWA K, ISHIHARA S. Characteristics of SN curve and subsurface crack initiation behaviour of high strength bearing steel in gigacycle fatigue [J]. Material Science Research International, STP-1, 2001, 35-40.（SCI）.