一、一作及通讯

1. Chengsong Zhang, Haoting Zhan, Xiaolong Zhou, Ninshu Ma*. An Improved Model for Prediction of Critical Velocity of Cold-Spray by First-Principles Calculations. Coatings 2024, 14(9), 1226

2. Daodong Tang, Chengsong Zhang*, Haoting Zhan, et al. High-Efficient Gas Nitridation of AISI 316L Austenitic Stainless Steel by a Novel Critical Temperature Nitriding Process. Coatings 2023, 13(10), 1708

3. Daodong Tang, Simiao Sun, Chengsong Zhang*, et al. Gas Nitriding of AISI 420 Martensitic Stainless Steel during the Incubation Period of CrN Precipitation. J. of Materi Eng and Perform 34, 10150–10159 (2025)

4. Shuai Li, Chengsong Zhang*, Dazhi Chen, et al. Catalytic gas nitriding of M50NiL steel by LaFeO3 pervoskite oxide under low-pressure conditions. Surfaces and Interfaces 40(2023)103098.

5. Chi Liu, Shaowei Deng, Linwang Chen, Yanhuan Wang, Daodong Tang, Hongrui Zeng, Qiyang Guo, Dazhi Chen,Chengsong Zhang*, Guodong Cui*. Effect of pre-treatment and austempering on microstructure and mechanical properties of 55Si2MnMoV steel. Journal of Materials Research and Technology, 24 (2023) 4833-4842.

6. Chengsong Zhang*, Yun Wang, Dazhi Chen, et al. Effect of elemental doping on the catalytic activity of ABO3 perovskite oxides during low-pressure gas nitriding. Applied Surface Science 542 (2021) 148706

7. Chengsong Zhang⁎, Yun Wang, Xing Chen, Hongtao Chen, Yeqiong Wu, Yixue Wang, Lina Tang, Guodong Cui, Dazhi Chen. Catalytic behavior of LaFeO3 pervoskite oxide during low-pressure gas nitriding. Applied Surface Science, 2020, 506: 145045.

8. Wenzhi Xie, Yunxia Chen, Dazhi Chen, Yang Yang, Chengsong Zhang*, Guodong Cui，YixueWang. Low-pressure gas nitriding of AISI 304 austenitic stainless steel: reducing the precipitation of chromium nitrides . Mater. Res. Express 7 (2020) 066406.

9. Xing Chen, Xiangyun Bao, Yang Xiao, Chengsong Zhang⁎, Lina Tang, Lei Yao, Guodong Cuia, Yang Yang. Low-temperature gas nitriding of AISI 4140 steel accelerated by LaFeO3 perovskite oxide. Applied Surface Science, 2019, 466: 989-999.

10. Xing Chen. Lei Yao. Jia Guo. Lina Tang. Chengsong Zhang*, Mufu Yan, Improvement in Surface Properties of M50NiL Steel by Plasma
Nitriding with Rare Earth Addition, J Fail. Anal. and Preven. (2019) 19:1420–1427.

11. Xing Chen, Yun Wang, Wenzhi Xie, Lina Tang, Chengsong Zhang*, Hongtao Chen, Jingbao Zhang, Guodong Cui. Fabrication and corrosion resistance of super-thick compound layer by austenitic gas oxynitrocarburizing. Journal of Alloys and Compounds 765 (2018) 1099-1110 .

12. Ai Li, Xing Chen, Chengsong Zhang*, Guodong Cui, Hui Zhao, Chuan Yang. A novel crack healing in steels by gas nitrocarburizing. Applied Surface Science 442 (2018) 437–445.

13. Xing Chen. Shuaijiang Yan. Chengsong Zhang*. Guodong Cui. Chuan Yang. Failure Analysis of Insulator Iron Cap in Low Stress State. J Fail. Anal. and Preven. (2018) 18:828–836.

14. 李爱，丁宗凯，胡洋 , 李航，崔国栋，杨川，张程菘 *. 微细 粉的添加对 合金结构和力学性能的影响, 金属热处理，2016，41（16）

15. Hao Wua1, Chengsong Zhang1,GuohuaFan⁎, Lin Geng, Guochao Wang. Origin of reduced anisotropic deformation in hexagonal close packed Ti-Al alloy. Materials and Design 111 (2016) 119–125.

二、合作署名文章

1. Wenzhang Nan, Shaojiu Yan, Chengsong Zhang, et al. Realizing stable lithium metal anode with surface-preferred crystal plane through Mg doping. Journal of Energy Storage 100 (2024) 113559.

2. Wenzhang Nan, Shaojiu Yan, Xinhao Li, Chengsong Zhang, et al. Constructing a 3D Li-Mg alloy skeleton through mechanical rolling for high-rate Li anodes. Journal of Energy Storage 100 (2024) 113592.

3. Hongying Li*, Chaoyong Luo, Ce Zhang, Lei Wu, Xiaolong Zhou, Chengsong Zhang, Yang Wang, ZhiwuWang*. In-Depth Understanding of the Chemical Stripping Mechanism of AlSiY Coatings on Nickel Superalloys by First-Principles Calculation. Coatings. 2024; 14(1):135.

4. Jiping Lu, Qingxiang Wang, Chi Liu, Chengsong Zhang, Dazhi Chen*, Guodong Cui*. Cracking behavior of AISI 316L stainless steel powder by gas nitriding and its influence on spark plasma sintering. Journal of Materials Research and Technology, 20 (2022) 3796-3806.

5. Hongbo Xia, Yunwu Ma*, Chuantong Chen, Jianhui Su, Chengsong Zhang, Caiwang Tan,  Liqun Li, Peihao Geng, Ninshu Ma*. Influence of laser welding power on steel/CFRP lap joint fracture behaviors. Composite Structures 285 (2022) 115247.

6. Chi Liu, Yifei Chen, Chengsong Zhang, Dazhi Chen*, Guodong Cui*. Enhanced strength and plasticity in a novel 55Si2MnMoV spring steel via austempering. Materials Science & Engineering A 825 (2021) 141887.

7. Runjian Jiang, Guodong Cui∗, Eugene A. Olevsky, Chengsong Zhang, Dazhi Chen. Evading strength-plasticity conflict in microstructure-optimized Fe-Cu-Ni-P sintered alloy via layered-composite powder. Materialia 14 (2020) 100903.

8. Yang Hu, Runjian Jiang, Jingbao Zhang, Chengsong Zhang, Guodong Cui*. Synthesis and properties of magnetic multi-walled carbon nanotubes loaded with Fe4N nanoparticles. Journal of Materials Science & Technology 34 (2018) 886–890.

9. Shuaijiang Yan, Qingxiang Wang, Xing Chen, Chengsong Zhang, Guodong Cui*. Fabrication of highly compact Inconel 718 alloy by spark plasma sintering and solution treatment followed by aging. Vacuum 163 (2019) 194-203. 

10. Runjian Jiang, Ai Li, Guodong Cui⁎, Chengsong Zhang, Hongtao Chen, Yixue Wang. Influence of Ni-P content on microstructure and mechanical properties of Fe x(Ni+P)-1Cu alloys. Materials Science & Engineering A 707 (2017) 1-11.

11. Yuan You*, Jihong Yan, Mufu Yan*, Chengsong Zhang, Hongtao Chen, Yixue Wang, Yanxiang Zhang, Chaohui Wang. La interactions with C and N in bcc Fe from first principles. Journal of Alloys and Compounds 688 (2016) 261-269.