M. Yu, H. Chen, W.-Y. Li, X. K. Suo &H. L. Liao. Building-Up Process of Cold-Sprayed Al5056/In718 Composite Coating, Journal of Thermal Spray Technology, 2015, 24( 3): 579-586 . DOI 10.1007/s11666-014-0205-z (SCI )

M. Yu*, W.Y.Li, H. Chen, X. K. Suo and H. L. Liao. Effect of matrix/reinforcement combination on cold sprayed coating deposition behavior, Surface Engineering , 2014, 30 (11): 796-800.  DOI 10.1179/1743294414Y.0000000346 (SCI)

T. Yang , M. Yu *, H. Chen1, W.Y. Li , H. L. Liao . Characterization of cold-sprayed Al5056/SiCp coating: effect of SiC particle size, Surface Engineering, 2016(ACCPETED). DOI 10.1179/1743294415Y.0000000042

4. Liu Jian, Yu Min*, Fang Xifeng, Wang Ren and Cheng Yongming， Effect of Weld Reinforcement on Fatigue Properties of A6N01 Aluminum Alloy Welded Joint，China Welding,2015 (ACCPETED).

M. Yu, X.K. Suo, W.Y. Li*, H.L. Liao. Microstructure, mechanical property and wear performance of cold sprayed Al5056/SiCp composite coatings: Effect of reinforcement content. Applied Surface Science, 2014, 289, 188-196.DOI 10.1016/j.apsusc.2013.10.132 (SCI )

M. Yu, W.Y. Li*, F. F. Wang, H. L. Liao. Effect of preheating on deformation in cold spraying dissimilar combinations. Surface Engineering, 2014, 30(5): 329-334. DOI10.1179/1743294413y.0000000203  (SCI )

M. Yu, W.Y. Li*, F.F. Wang, X.K. Suo, H.L. Liao. Effect of particle and substrate preheating on particle deformation behavior in cold spraying. Surface and Coatings Technology, 2013, 220, 174-178. DOI 10.1016/j.surfcoat.2012.04.081 (SCI )

M. Yu, W.Y. Li*, X.K. Suo, H.L. Liao, Effects of gas temperature and ceramic particle content on microstructure and microhardness of cold sprayed SiCp/Al 5056 composite coatings. Surface and Coatings Technology, 2013, 220, 102-106. DOI 10.1016/j.surfcoat.2012.05.050 (SCI )

M. Yu, W.Y. Li*, X.P. Guo, H. L. Liao. Impacting behavior of large oxidized copper particles in cold spraying. Journal of Thermal Spray Technology, 2012, 22(2-3), 433-440. DOI 10.1007/s11666-012-9849-8 (SCI )

M. Yu, W.Y. Li*, J.L. Li, Y.J. Chao. Modelling of entire friction stir welding process by explicit finite element method. Materials Science and Technology, 2012, 28(7), 812-817. DOI 10.1179/1743284711Y.0000000087 (IF:0.751)

M. Yu, W.Y. Li*, F.F. Wang, H.L. Liao. Finite element simulation of impacting behavior of particles in cold spraying by Eulerian approach. Journal of Thermal Spray Technology, 2012, 21(3-4), 745-752.DOI 10.1007/s11666-011-9717-y (SCI )

M. Yu, W.Y. Li*, C. Zhang, H.L. Liao. Effect of vacuum heat treatment on tensile strength and fracture performance of cold-sprayed Cu-4Cr-2Nb coatings. Applied Surface Science, 2011, 257(14), 5972-5976. DOI 10.1016/j.apsusc.2011.01.076 (SCI )

Wen-Ya Li, Min Yu, Jinglong Li, Guifeng Zhang, Shiyuan Wang, Characterizations of 21-4N to 4Cr9Si2 stainless steel dissimilar joint bonded by electric-resistance-heat-aided friction welding, Materials & Design, 2009, 30(10), 4230-4235. (SCI, EI)

Li Wenya*, Yu Min, Wu Hui, Liao Hanlin, Effect of Mesh Resolution on the Particle Deformation during Cold Spraying by Eulerian Formulation, Rare Metal Materials and Engineering, 2012, 41(Suppl. 1).

Wen-Ya Li, Min Yu, Jinglong Li, Dalu Gao, Explicit Finite Element Analysis of the Plunge Stage of Tool in Friction Stir Welding, Materials Science Forum, 2009, 620-622, 233-236. (EI, ISTP)

Wen-Ya Li, Min Yu, Jinglong Li, Dalu Gao, Study on Deformation and Microstructure Characterizations of Mild Steel Joints by Continuous Drive Friction Welding, China Welding, 2009, 18(3), 1-6. (EI)

李文亚，余敏，质量放大因子对搅拌摩擦焊插入过程的影响，焊接学报，2010，31(2)，1-4. (EI)

李文亚，余敏，Hanlin Liao，真空热处理对冷喷涂多孔Ti组织与拉伸性能影响研究，中国有色金属学报，2010，20(Special 1)，s902-s905. （核心期刊）

李文亚，余敏，高大路，李京龙，连续驱动摩擦焊接头热力耦合过程三维数值模拟研究，航空制造技术，2010，(2)，86-89. （西工大重要期刊）

李文亚，余敏，李京龙，李雪飞，摩擦焊接头塑性金属流动行为研究现状，航空制造技术，2010，(24)，85-88.（西工大重要期刊）

李文亚，余敏，冷喷涂技术的最新研究现状，表面技术，2010，39(5)，95-99.