发表的论文:

(1)黄林，李金柳，李国超，郝江江，胥永刚.Fe含量对Mn50.35Cu（48.1-x）Al1.55Fex合金阻尼性能的影响. 材料科学与工程学报. 2017. Vol.35 No.2：283-287.

(2)Aliakbar Emdadi, Martinson A. Nartey, Yong-gang Xu, Igor S. Golovin. Study of damping capacity of Fe-5.4Al-0.05Ti alloy，Journal of Alloys and Compounds 653 (2015) 460-467.

(3)Jin, Qian，Xu, Yong-Gang，Di, Yang，Fan, Hao, Influence of the particle size on the rheology of magnetorheological elastomer, Material Science Forum, V809-810, P757-763,2015.

(4)王以伟，郝江江，陈盼，胥永刚(*).Fe-Cr-Mo合金颗粒对磁流变弹性体损耗因子的影响. 材料科学与工艺. 2015.Vol.23 No.6:109-113.

(5)Yong-gang Xu，Xiao-gang Chen，On relationship between annealing treatment and magnetostriction behavior of Fe-16Cr-2.5Mo damping alloy，Journal of Alloys and Compounds，2014,582(582):364-368.

(6)陈晓钢,胥永刚,金佥,退火态Fe-16Cr-2.5Mo阻尼合金磁致伸缩特性与阻尼性能的关系分析,金属热处理,2013,38(02)：35-38.

(7)M.-j Liu, G.-j Song, J. Yi, and Y.-g. Xu, Damping Analysis of Polyurethane/Polyacrylate Interpenetrating Polymer Network Composites Filled With Graphite Particles, POLYMER COMPOSITES,pp.287-292, 2013.

(8)Yong-gang Xu(#)(*)，Ning Li，Yu-hua Wen，Xiao-gang Chen，Energy-dissipation characteristics of Fe-13Cr-2.5Mo damping alloy，Journal of Alloys and Compounds，2012,（539):36-39.

(9)Yong-gang Xu, Li Ning , Yu-hua Wen, Effect of domain variations on damping capacity of Fe–16Cr–2.5Mo alloy solution annealed at 1373 K and 1473 K, Journal of Magnetism and Magnetic Materials,323(2011) 819-821.

(10)Yong-gang XU, Ning LI,Yu-hua, WEN, Xiao-gang Chen, ON ENERGY DISSIPATION CHARACTERISTICS OF FE-13CR-2.5MO DAMPING ALLOY, Congress on Engineering and Technology,2011,p397-401

(11)张恒伟，李家凤，胥永刚, 硅橡胶基磁流变弹性体制备及动态剪切性能研究, 材料导报2011,Vol.25. No.17. p365-368.

(12)Xu, Y.-G, Li, N. etc. Effect of Annealing Treatment on Damping Capacity of Fe-7Al-0.5Ti Alloy. (SCI9305208) Materials Science and Engineering A 447 (2007) 163-166.

(13)胥永刚.李宁等.淬火工艺对Fe-13Cr-2.5Mo合金内耗的影响.钢铁研究学报2006.No.6.Vol.18.

(14)Xu, Y.-G, Li, N. etc. Influence of ambient temperature and magnetic field on damping behavior of Fe-13Cr-2.5Mo alloy. International conference on Smart Materials and Nanotechnology in Engineering (SMN2007),Journal of Smart Material and Structure.

(15)胥永刚.李宁等.高温回火热处理对9Cr-1Mo钢焊缝组织韧性的影响.材料科学与工艺. 2006,Vol.14, No.1, Feb., p39-41.

(16)胥永刚.李宁等.热处理温度和时间对Fe-7Al-0.5Ti合金微观组织及阻尼性能的影响.材料科学与工艺.2005.Vol.13.No.3.p320-322.

(17)胥永刚.李宁等.环境温度及外磁场对Fe-13Cr-2.5Mo合金内耗的影响.材料工程. 2005,No.4,April, p18-20.

(18)胥永刚.李宁等.预拉伸变形对Fe-14Mn-0.22C合金阻尼性能的影响.振动与冲击. Vol.24,No.5,2005, p109-110.

(19)李宁.胥永刚等.900℃退火时间对Fe-7Al-0.5Ti合金阻尼性能及其磁畴结构的影响. 四川大学学报工科版.2005.No.1,p43-46.

(20)李宁. 胥永刚等.热处理工艺及环境温度对Fe-5Al合金阻尼性能的影响.振动与冲击. 2005.Vol.24.No.4. p50-51,55.

(21)胥永刚.李宁.Fe-13Cr-2.5Mo合金阻尼性能及磁畴的观察. 热加工工艺. 2004. No.11. p9-11.

(22)李宁. 胥永刚等.固溶处理对Fe-14Mn-0.22C合金阻尼性能的影响.金属热处理. Vol.29.No.10.Oct.2004.12.p20-21.

(23)胥永刚.李宁等.铬、铌和钒对9Cr-1Mo钢焊缝回火组织性能的影响.焊接学报.2002.10.Vol.23.No.5.p49-52.

(24)龙昕.胥永刚等.9%Cr-1%Mo耐热钢焊缝金属连续冷却组织转变.焊接学报.2000.Vol.21.No.1.P53-56.

(25)胥永刚.杨传云等.焊条药皮中Si-Ba合金对焊缝组织性能的影响.热加工工艺.2000.No.3.p22-23.

(26)胥永刚.李宁等.高温回火对9Cr-1Mo钢焊缝组织和性能的影响.热加工工艺.1999.No.2.p32-34.