四川省青年科技创新团队2013TD0004

固体接触力学、接触疲劳与磨损、复合材料力学

在国内外重要学术刊物发表了60多篇论文（其中国际刊物论文18篇、国内刊物论文27篇），作为第一作者累计近30篇(次)文章被SCI、EI收录。

(1)    Jiang X Y(#)(*), Li X T, Li X, Cao S H. Rail fatigue crack propagation in high-speed wheel/rail rolling contact. Journal of Modern Transportation, 2017, 25(3)：178-184(SCIE).

(2)    Li X T, Li X, Jiang X Y(*). Influence of a micro-crack on the finite macro-crack. Engineering Fracture Mechanics, 2017, 177: 95-103(SCIE).

(3)    Li X T, Li X, Yang H D, Jiang X Y(*). Analysis of the effect of a micro-crack on plastic zone of the edge macro-crack tip by macroscopic and microscopic methods. Engineering Fracture Mechanics, 2018, 201: 1-12(SCIE).

(4)    Li X T, Yang H D, Zan X D, Li X, Jiang X Y(*). Effect of a micro-crack on the kinked macro-crack. Theoretical and Applied Fracture Mechanics, 2018, 96: 468-475(SCIE).

(5)    Li X, Li X T, Cao S H, Jiang X Y(*). Analysis of different damage configurations at a macro-crack tip. Archive of Applied Mechanics, 2019, 89(7):1259-1274 (SCIE).

(6)    Li X T, Jiang X Y(*). Effect of a Micro-crack on the Edge Macro-crack Propagation Rate and Path Under Mixed Loads. Acta Mechanica Solida Sinica, 2019, 32(4):517-532(SCIE).

(7)    Li X T, Zhao J F, Zhang X, Jiang X Y(*). Revealing the inhibition mechanism of grain size gradient on crack growth in gradient nano-grained materials. International Journal of Solids and Structures, 2019, 172:1-9(SCIE).

(8)    Li X T, Jiang X Y(*). Effects of dislocation pile-up and nanocracks on the main crack propagation in crystalline metals under uniaxial tensile load. Engineering Fracture Mechanics, 2019, 212:258-268(SCIE).

(9)    Li X T, Jiang X Y(*).Theoretical analyses of nanocrack nucleation near the main crack tip in nano and micro crystalline materials. Engineering Fracture Mechanics, 2019, 221:106672(SCIE).

(10)  Li X T, Jiang X Y(*), Li X, Yang H D, Zhang Y K. Solution of an inclined crack in a finite plane and a new criterion to predict fatigue crack propagation. International Journal of Mechanical Sciences, 2016, 119: 217-223(SCIE).

(11)  Li X T, Li X, Yang H D, Jiang X Y. Effect of micro-cracks on plastic zone ahead of the macro-crack tip. Journal of Materials Science, 2017, 52(23)：13490-13503(SCIE).

(12)  Cao S H, Yang R S, Su C G, Dai F, Liu X Y, Jiang X Y. Damage mechanism of slab track under the coupling effects of train load and water. Engineering Fracture Mechanics, 2016,163: 160-175(SCIE).

(13)曹世豪，江晓禹*，文良华．轴重和摩擦力对轮轨接触疲劳的影响[J]．表面技术，2013，42(6): 31-36.(中文核心)

(14)李士一，肖华磊，江晓禹*．轮轨接触表面微裂纹的扩展[J]．钢铁研究学报，2013，25(6)：35-39．(中文核心)

(15)马莉, 江晓禹*. 环氧树脂对玻璃纤维／水泥复合材料界面性能的影响[J]. 玻璃钢／复合材料, 2012,222(1):8-12．(中文核心)

(16)裴永琪，江晓禹*．纤维增强复合材料界面损伤的细观力学模型[J]．四川大学学报（自然科学版），2012，42（supp2)：122-124.（EI20104813430908）

(17)许荔，江晓禹*. TiN/WC-Co涂层刀具划痕损伤的三维有限元分析[J]. 机械科学与技术，2010，29(7): 940-944．(中文核心)

(18)乔建平．长江三峡库区重点滑坡段危险性评价及预测预报研究[M]．成都：四川大学出版社，2009 (江晓禹编写第五章，68-84)．

(19)Xu L, Jiang X Y*. Finite element analysis of damage process of NiTi/ Q235 steel composites[C]. Psalidi, Greece: International Conference on Numerical Analysis and Applied Mathematics, 2008,1048:597-600.（ISTP）

(20)Jiang X Y*, Jin X S. Numerical simulation of wheel rolling over rail at high-speeds[J].Wear, 2007, 262: 666–671.(SCI)

(21)Jiang X Y*，Qiao J P, Wang C H, Zhao Y. Computer simulation of landslides by the contact element method[J]. Computers & Geosciences 2006, 32: 434–441.(SCI)

(22)Jiang X Y*, Jin X S. Stresses analysis for wheel/rail system when liquid and micro-roughness existing on contact surfaces[C]. Brisbane, Australia: 7th international conference on contact mechanics and wear of rail/wheel systems, 2006, 77-81.

(23)江晓禹*, 乔建平．典型滑坡危险性的接触力学预测模型[J]．工程力学，2006,23(8):106-109．(EI)

(24)江晓禹*，金学松. 轮轨接触表面有液态介质时的接触问题研究[J]. 工程力学，2005, (2):27?32.(EI)

(25)江晓禹*, 金学松. 轮轨间的液态介质和表面微观粗糙度对接触表面疲劳损伤的影响[J], 机械工程学报,2004 ,40(8):18-23．(EI)

(26)于海洋*，江晓禹，周仲荣．过盈量对植入体与骨接触压力的影响[J]．机械工程学报．2004, 40(4): 89-92．(EI)

(27)Jiang X Y*，Lauke B. Frictional contact analysis of scratch test for elastic and elasticˉplastic thin-coating/substrate materials[J]. Thin Solid Films,2002, 414: 63-71.(SCI)

(28)Jiang X Y*, Lauke B. Numerical simulation of micro-scratch tests for coating/substrate composites[J]. Composite Interfaces，2001, 8: 19-40.(SCI)

(29)Jiang X Y*，Gao Q. Stress-transfer analysis for fibre/matrix interfaces in short-fibre-reinforced composites[J]. Composites Science and Technology, 2001, 61(10), 1359-1366.(SCI)

(30)江晓禹*, 孔祥安. 复合材料的粘弹性摩擦接触力学研究[J]．高分子材料科学与工程, 2000，16(1): 23-28．(EI)

(31)孔祥安，江晓禹，金学松. 固体接触力学[M]，北京：中国铁道出版社，1999.

(32)Jiang X Y*. Frictional contact analysis of composite materials[J]. Composites Science and Technology, 1995, 54(4): 341-348.(SCI)

暂无内容

暂无内容