陈开卷，教授，博士生导师，国家级高层次青年人才（2023年入选）。分别于2014年6月和2019年9月在西南交通大学工程力学（茅以升学院）和力学专业获学士和博士学位；2016年11月至2018年5月在美国佐治亚理工大学访问学习，2019年11月至2022年12月在新加坡南洋理工大学从事博士后研究工作；2023年1月进入西南交通大学力学与航空航天学院工作。

2021年获“中国力学优秀博士学位论文奖（导师：康国政教授、H. Jerry Qi教授）”、2020年获美国惠普公司-新加坡南洋理工大学联合实验室的荣誉奖、2018年获西南交通大学“竢实扬华”奖章。

主要从事高分子材料本构关系及3D打印工艺力学研究工作，主持国家自然基金青年项目，作为主要完成人参与了中国、美国、新加坡国家自然科学基金的多个科研项目，取得了系列研究成果。在Journal of the Mechanics and Physics of Solids、International Journal of Plasticity、Science Advances、Advanced Functional Materials、Advanced Science和International Journal of Fatigue等发表SCI期刊论文 40 余篇，Google Scholar引用 2300 余次，H-index 19，2篇论文入选ESI高被引。受理美国发明专利2项，授权中国发明专利1项。

 Journal of Polymer Materials 副编辑，Defence Technology期刊青年编委，Additive Manufacturing、International Journal of Mechanical Sciences、Acta Mechanica、Engineering Failure Analysis等多个力学、增材制造期刊审稿人。

教育背景

2010.09-2014.06   本科    西南交通大学茅以升学院（力学专业）

2014.09-2019.09   博士    西南交通大学固体力学（导师：康国政教授）

海外经历

2016.11-2018.05   联培博士  美国佐治亚理工学院（联培导师： H. Jerry Qi教授）

2019.11-2023.01   博士后   新加坡南洋理工大学（合作导师： Kun Zhou教授、Hejun Du副教授）

工作经历

2023.01-2023.12   特聘副研究员    西南交通大学

2023.12至今      教授         西南交通大学

学术兼职

2022.06-2024.06   Defence Technology (SCI, JCR: Q1) 青年编委

2024.11至今      Journal of Polymer Materials (SCI, JCR: Q4)副编辑     

 发表SCI论文

1. Chen K.J., Zhang L., Kuang X., Li V.C.F., Lei M., Kang G.Z., Wang Z.L., Qi H.J., Dynamic photomask-assisted direct ink writing multimaterial for multilevel triboelectric nanogenerator. Advanced Functional Materials, 2019; 1903568: 1-9.

2. Chen K.J., Koh Z.H., Le K.Q., Teo H.W.B., Zheng H., Zeng J., Zhou K., Du H.J., Effects of build positions on the thermal history, crystallization, and mechanical properties of polyamide 12 parts printed by Multi Jet Fusion. Virtual and Physical Prototyping, 2022; 17(3): 631-648.

3. Chen K.J., Teo H.W.B., Rao W., Kang G.Z., Zhou K., Zeng J., Du H.J., Experimental and modeling investigation on the viscoelastic-viscoplastic deformation of polyamide 12 printed by Multi Jet Fusion. International Journal of Plasticity, 2021; 143, 103029.

4. Chen K.J., Teo H.W.B., Tian Y.Y., Wu S.C., Kang G.Z., Zhou K., Zeng J., Du H.J., Effect of build direction on tension-tension low cycle fatigue behavior of polyamide 12 parts printed by Multi Jet Fusion. International Journal of Fatigue, 2023: 107514. 

5. Chen K.J., Kang G.Z., Lu F.C., Chen J., Jiang H., Effect of relative humidity on uniaxial cyclic softening/hardening and intrinsic heat generation of polyamide-6 polymer. Polymer Testing. 2016; 56: 19-28. 

6. Chen K.J., Kang G.Z., Yu C., Jiang H., Effect of crystalline content on ratchetting of ultra-high molecular weight polyethylene polymers: Experimental investigation and constitutive model. Mechanics of Materials. 2019; 133: 37-54. 

7. Chen K.J., Kang G.Z., Yu C., Jiang H., Qi H.J., Non-proportional multiaxial ratchetting of ultrahigh molecular weight polyethylene polymer: Experiments and constitutive model. Mechanics of Materials. 2017; 112: 76-87. 

8. Chen K.J., Kuang X., Li V.C.F., Kang G.Z., Qi H.J., Fabrication of tough epoxy with shape memory effects by UV-assisted direct-ink write printing. Soft Matter. 2018; 14(10): 1879-86. 

9. Chen K.J., Kang G.Z., Lu F.C., Xu J.H., Jiang H., Temperature-dependent uniaxial ratchetting of ultra-high molecular weight polyethylene. Fatigue & Fracture of Engineering Materials & Structures. 2016; 39(7): 839-49. 

10. Chen K.J., Kang G.Z., Yu C., Lu F.C., Jiang H., Time-dependent uniaxial ratchetting of ultrahigh molecular weight polyethylene polymer: Viscoelastic-viscoplastic constitutive model. Journal of Applied Mechanics. 2016; 83(10): 101003.

11. Chen K.J., Kang G.Z., Lu F.C., Jiang H., Uniaxial cyclic deformation and internal heat production of ultra-high molecular weight polyethylene. Journal of Polymer Research. 2015; 22(11): 1-9. 

12. Tian Y.Y., Chen K.J., Zheng H., Devesh R.K., Zeng Z.H., Jarlöv. A., Chen J.Y., Bai L.C., Du H.J., Kang G.Z., Fang Q.H., Zhao L.H., Qi H.J., Wang Y.F., Zhou K., Additively Manufactured Structured Fabric for Shape-adaptive Protection. Advanced Science. 2023; 2301567.(共同第一作者)

13. Koh Z.H., Chen K.J., Du H.J., Zeng J., Zhou K., Long-term ageing effect on mechanical properties of polyamide 12 printed by Multi-Jet-Fusion, International Journal of Mechanical Sciences. 2023, 108513 (共同通讯作者)

14. Qin, F.P., Lu, F.C., Chen, K.J., Hou, Y.H., Zhang, C.B., Huang, L. Numerical simulation and experimental validation of ratchetting deformation of short fiber-reinforced polymer composites. Composites Part B: Engineering, 2023; 266, 110974.(共同通讯作者)

15. Huang, W.Y., Chen, K.J., Ma, P.Y., Kang, G.Z., A Visco-hyperelastic Constitutive Model for Temperature-Dependent Cyclic Deformation of Dielectric Elastomer. Acta Mechanica Solida Sinica, 2024; 1-14.(共同通讯作者)

16. Kuang X., Wu J.T., Chen K.J., Zhao Z.A., Ding Z., Hu F.J.Y., Fang D.N., Qi H.J., Grayscale digital light processing 3D printing for highly functionally graded materials. Science Advances. 2019, 5(5): 1-9.

17. Kuang X., Chen K.J., Dunn C.K., Wu J.T., Li V.C.F., Qi H.J., 3D Printing of highly stretchable, shape-memory, and self-healing elastomer toward novel 4D printing. ACS Applied Materials & Interfaces. 2018; 10(8): 7381-8.

18. Lei M., Hamel C.M., Chen K.J., Zhao Z.A., Lu H.B., Yu K., Qi H.J., Thermomechanical behaviors of polyether ether ketone (PEEK) with stretch-induced anisotropy. Journal of the Mechanics and Physics of Solids. 2021; 148, 104271.

19. Yu C., Kang G.Z., Chen K.J., A hygro-thermo-mechanical coupled cyclic constitutive model for polymers with considering glass transition. International Journal of Plasticity. 2017; 89: 29-65.

20. Yang J.Y., Kang G.Z., Liu Y.J., Chen K.J., Kan Q.H., Life prediction for rate-dependent low-cycle fatigue of PA6 polymer considering ratchetting: Semi-empirical model and neural network based approach. International Journal of Fatigue. 2020; 136, 105619. 

21. Yang J.Y., Kang G.Z., Chen K.J., Kan Q.H., Liu Y.J., Experimental study on rate-dependent uniaxial whole-life ratchetting and fatigue behavior of polyamide 6. International Journal of Fatigue. 2020; 132, 105402. 

22. Kuang X., Guo E., Chen K.J., Qi H.J., Extraction of biolubricant via chemical recycling of thermosetting polymers. ACS Sustainable Chemistry & Engineering. 2019; 7 (7): 6880-88.

23. Hamel C.M., Kuang X., Chen K.J., Qi H.J., Reaction-diffusion model for thermosetting polymer dissolution through exchange reactions assisted by small-molecule solvents. Macromolecules. 52(10) : 3636-45. 

24. Xie X., Kan Q.H., Kang G.Z., Lu F.C., Chen K.J., Observation on rate-dependent cyclic transformation domain of super-elastic NiTi shape memory alloy. Materials Science and Engineering: A. 2016; 671: 32-47.

25. Yang J.Y., Kang G.Z., Chen K.J., Kan Q.H., Experimental study on uniaxial ratchetting-fatigue interaction of polyamide-6. Polymer Testing. 2018; 69: 545-55. 

26. Yu C., Kang G.Z., Chen K.J., Lu F.C., A thermo-mechanically coupled nonlinear viscoelastic-viscoplastic cyclic constitutive model for polymeric materials. Mechanics of Materials. 2017; 105: 1-15. 

27. Teo H.W.B., Chen K.J., Du H.J., Zeng J., Zhou K., Non-isothermal crystallization behaviour of polyamide 12 analogous to multi-jet fusion additive manufacturing process. Polymer. 2021; 235, 124256.

28. Kuang X., Zhao Z.A., Chen K.J., Fang D.N., Kang G.Z., Qi H.J., High-speed 3D printing of high-performance thermosetting polymers via two-stage curing. Macromolecular Rapid Communications. 2018; 39(7): 1-8.

29. Roach D.J., Kuang X., Yuan C., Chen K.J., Qi H.J., Novel ink for ambient condition printing of liquid crystal elastomers for 4D printing. Smart Materials and Structures. 2018; 27(12): 125011. 

30. Li J., Kan Q.H., Chen K.J., Liang Z.H., Kang G.Z., In situ observation on rate-dependent strain localization of thermo-induced shape memory polyurethane. Polymers, 2019; 11(6), 982. 

31. Teo H.W.B., Tran V.T., Chen K.J., Le K.Q., Du H.J., Zeng J., Zhou K., Investigation of polyamide 12 isothermal crystallization through the application of the phase-field model. Polymers for Advanced Technologies, 2023; 34(2): 748-757. 

32. Yu C., Kang G.Z., Lu F.C., Zhu Y.L., Chen K.J., Viscoelastic-viscoplastic cyclic deformation of polycarbonate polymer: Experiment and constitutive model. Journal of Applied Mechanics. 2016; 83(4): 041002.

33. Li W.D., Teo H.W.B., Chen K.J., Zeng J., Zhou K., Du H.J., Mesoscale simulations of spherulite growth during isothermal crystallization of polymer melts via an enhanced 3D phase-field model. Applied Mathematics and Computation. 2023; 446, 127873.

34. Li J., Liang Z.H., Chen K.J., Zhang X., Kang G.Z., Kan Q.H., Thermo-mechanical deformation for thermo-induced shape memory polymers at equilibrium and non-equilibrium temperatures: Experiment and simulation. Polymer. 2023; 270, 125762. 

35. Zhang Q., Zhao Z.A., Wu D., Chen K.J., Weng S.Y., Mechanics-guided design of inflatable heterogeneous shape memory polymer vascular stents, International Journal of Mechanical Sciences. 2023; 254, 108405.

36. Le K.Q., Chen K.J., Teo H.W.B., Zeng J., Zhou K., Du H.J., Predicting crystallinity of polyamide 12 in multi jet fusion process. Journal of Manufacturing Processes. 2023; 99, 1-11.

37. Ma P.Y., Chen K.J., Liu J.J., Chen Y.F., Kang G.Z., Experimental study on pure-shear cyclic deformation of dielectric elastomer at different temperatures. Polymer Testing, 2023; 129, 108262. 

38. Liang Z.H., Li J., Chen K.J., Dong Y., Yu C., Kan Q.H., Multiaxial shape memory effect of thermo-induced shape memory polyurethane under proportional tension-torsion loading. Smart Materials and Structures, 2023; 32(7), 075018. 

39. Dong Y., Chen K.J., Liu H., Li J., Liang Z.H., Kan Q.H., Adjustable mechanical performances of 4D-printed shape memory lattice structures. Composite Structures,2024, 34, 117971

40. Liang Z.H., Li J., Chen K.J., Yu C., Kan Q.H., Multiple relaxation mechanism-based thermo-mechanical constitutive model describing cyclic shape memory effect of shape memory polyurethane. Acta Mechanica Sinica, 2024; 40(1), 423347.

41. Jiang H. M., Fu Z.H., Chen K.J., Kan Q.H., Yu C., Kang G.Z., Effect of hydrogen on the rate-dependent deformation of superelastic NiTi shape memory alloy springs: Experimental observation and thermo-diffusional-mechanically coupled model. International Journal of Solids and Structures, 2024; 112743.

 

发明专利

1. 卢福聪，康国政，刘宇杰，阚前华，徐祥，陈开卷，赵天行。一种聚合物材料室高温多轴循环试验装置。发明专利(Zl 2015 11031128.5)，2018.01.05.

2. Tran V.T., Du H.J., Zeng J., Zhou K., Teo H.W.B, Chen K.J., Le K.Q., Polymer melt pool crystallization measurement. US Patent Invention Reference: 700242535

3. Chen K.J., Koh Z.H., Le K.Q. Zeng J., Du H.J., Zhou K., Material and mechanical property prediction from manufacturing parameters for additive manufacturing. US Patent Invention Reference: 86244508

 

暂无内容

暂无内容