发表论文40余篇，近年发表论文如下：

[1-1] Zhiqiang Cheng, Thierry Barriere, Baosheng Liu et al. A vectorial algorithm with finite element method for prediction of powder segregation in metal injection molding. International Journal for Numerical Methods in Fluids, v 70, n 10, p 1290-1304, December 10, 2012.

[1-2] Zhiqiang Cheng, Thierry Barriere, Baosheng Liu et al. A new explicit simulation for injection molding and its validation. Polymer Engineering and Science, 2009, 49(6):1243-1252.

[2] 成志强, QUINARD C, BARRIERE T等。316L注射料在不同孔径毛细管下的粘性行为。机械工程学报, 2010，46（12）：43-47。

[3] 成志强, BARRIERE T, 柳葆生等。微注射成形实验与数值模拟。西南交通大学学报, 2010，45（4）：635-638。

[4] Zhiqiang Cheng, Cedric Quinard, Xiangji Kong et al. Viscous Behaviours of Feedstocks for Micro MIM. Advanced Materials Research, 2011,314-316:713-718.

[5] Z.Q. Cheng , T. Barriere, B. S. Liu et al. A Vectorial Algorithm with Finite Element Method for Prediction of Powder Segregation in Metal Injection Molding. Int. J. for Num. Meth. in Fluids，accepted.

[6] 石建军, 成志强, 柳葆生。 微注射成形中表面张力效应及其影响的数值模拟。 应用力学学报, 2010, 27(4):723-727。

[7] Larsen, G., Cheng, Z.Q., Barriere, T. et al. A Streamline-Upwind Model for Filling Front Advection in Powder Injection Moulding. 10th International Conference on Numerical Methods in Industrial Forming Processes, NUMIFORM 2010, 545-552.

[8] Larsen, G., Cheng, Z.Q., Barriere, T., et al. Simulation of Micro Injection Moulding with Emphasis on the Formulation of Feedstock Viscosity: Use of Non-equilibrium Molecular Dynamics for the Determination of Viscosity of Multi-body Fluid. AIP Conference Proceedings, 2011,1353:714-719.

[9] Larsen, G., Cheng, Z.Q., Barriere, T., et al. Particle-polymer Interactions Analysis For Metal Powder Injection Molding Feedstock: A Molecular-dynamics Simulation With Dissipative Particle Dynamics Using ESPResSo. AIP Conference Proceedings, 2011,1353:109-114.

[10] Larsen, G., Cheng, Z.Q., Barriere, T. et al. Modelling and numerical simulation of biphasic fluid flow. Steel Research Int., 2010，81(9)：1458-1461.

[11] 钟叙，石建军，成志强等。摩擦对316L不锈钢粉末烧结尺寸变化的影响。断裂与疲劳及结构安全性评定，西南交通大学出版社，2009，91-94。

[12] 石建军, 成志强, 柳葆生。 PIM 填充模拟的修正算法。西南交通大学学报，已录用。

[13] 罗会亮, 成志强, 柳葆生。 接触刚度法在井架承载能力评估上的应用。石油机械，2011，Vol.39,No.8,p24-26。

[14] 王言聿，成志强，柳葆生等。基于Fluent软件的二次开发计算气举阀流量。石油机械，已录用。

[15] 成志强，王言聿。气举阀数值试验平台的构建。全国气举技术研讨会论文集，石油工业出版社，2011, 69-73。