发表期刊论文94篇（SCI收录76篇，H因子25）

2024

1.  Yan Xia, Han JIANG, Chengbin Yao, Zhuoran Yang, Zhongmeng Zhu*, Guozheng Kang, Revealing the shear fatigue damage mechanism of soft adhesive: Coexistence of viscoelastic and damage dissipation, Journal of the Mechanics and Physics of Solids,v185, 105556, 2024

2.Yan Xia, Chengbin Yao, Zhongmeng Zhu, Zhuoran Yang,  Han JIANG*, Accelerated prediction of shear fatigue life of soft adhesive based on the time-temperature superposition principle, Fatigue & Fracture of Engineering Materials & Structures, v47:1070–1081, 2024

3. 孙熠洲，杨卓然，夏炎，蒋晗*，杨桃启发的仿生星型薄壁结构耐撞性研究，机械强度，46( 1) : 40-47，2024 

4. 蔡鸿彬，刘天远，杨卓然，程前，蒋晗*，粘接层对聚甲基丙烯酸甲酯涂层刮擦破坏的影响及机理分析，固体力学学报，v (1): 88-110，2024

5. Zhuoran Yang, Yan Xia, Chengbin Yao, Zhongmeng Zhu, Zhanli Liu, Han JIANG*, Kaijie Wang*, Fractional cyclic cohesive zone model for time-dependent fatigue behavior of soft adhesives under Mode-II loading, International Journal of Fatigue, published online,2024 

2023

1. Kang Chen, Zhongmeng Zhu, Zhuoran Yang, Yan Xia, Yuzhou Sun, Tianyuan Liu,Qian Cheng, Chengbin Yao, Han JIANG*, Investigating inter/intralayer interface-triggered toughening mechanisms of three-dimensional printed polylactic acid using double-notch four-point-bending method, Engineering Fracture Mechanics, v284, 109277, 2023

2. Yan Xia, Chengbin Yao, Zhongmeng Zhu, Zhuoran Yang, Han JIANG*, A modified MERR model for predicting mode II fracture initiation angle considering boundary constraint effect, Fatigue & Fracture of Engineering Materials & Structures, 2023;46:2725–2735

3. Zhuoran Yang, Yan Xia, Zhongmeng Zhu, Chengbin Yao,  Han JIANG*, Cohesive zone model to investigate complex soft adhesive failure: state-of-the-art review, International Journal of Applied Mechanics, v15(8), 2350054,  2023

4.Zhuoran Yang, Zhongmeng Zhu, Chengbin Yao, Yan Xia,   Han JIANG*, Counterintuitive delayed failure of soft adhesive system under shear holding，International Journal of Mechanical Sciences, v259, 108634, 2023

5.Kang Chen, Fan Yang, Chengbin Yao, Tianyuan Liu, Han JIANG*,  Single material FDM printed nacre-like composite structure with high fracture resistance: utilizing interface as soft phase, Composites Communications, v42, 101682, 2023

6.Zhongmeng Zhu, Zhuoran Yang, Fan Yang, Chengbin Yao, Han JIANG*, Enhancing interfacial shear debonding resistance by mechanical mismatch, International Journal of Mechanical Sciences, v260,  108656, 2023

7. Qian Cheng, Fan Yang, Zhuoran Yang,  Han JIANG*, Zhongmeng Zhu, Tianyuan Liu, Hongbin Cai,Friction Reduction and Motion Stability of Setal Array Sliding on Rough Surface,Tribology Letters, v71, 114, 2023

8.  程前，杨卓然，蒋晗*，3D打印聚乳酸材料表面纹理结构刮擦行为研究，实验力学，2023,38(3):307~316

9. Xuelian Zhang, Junjie Liu, Jian Li, Zhihong Liang, Han JIANG, Guozheng Kang, Qianhua Kan, Experimental investigation on pure-shear ratcheting behavior of double-network tough hydrogels, Extreme Mechanics Letters, v60, 101984, 2023

2022

1. Zhongmeng Zhu, Zhuoran Yang, Han JIANG*, A review of debonding behavior of soft material adhesive systems, Mechanics of Soft Materials, v4, 7, 2022

2. Zhuoran Yang, Yan Xia, Fan Yang, Zhongmeng Zhu, Yuzhou Sun,   Han JIANG*, Peeling angle effect on soft adhesive: mixed-mode CZM considering fibrillation, Engineering Fracture Mechanics, v274,  108778, 2022

3. Zhuoran Yang, Zhongmeng Zhu, Chengbin Yao, Yan Xia, Kang Chen, Han JIANG*, A rate-dependent cohesive zone model for adhesive damage considering fibrillation, International Journal of Mechanical Sciences,v234, 107697, 2022

4. Chengbin Yao, Yan Xia, Zhongmeng Zhu, ZhuoranYang, Kang Chen,  Han JIANG*, Investigation on brittle-ductile transition of PMMA mode-II fracture using time-temperature superposition principle, Engineering Fracture Mechanics,V273, 08733, 2022

5. Yan Xia, Zhongmeng Zhu, Zhuoran Yang, Taolin Sun, Chengbin Yao, Han JIANG*,Time-temperature superposition principle for the shear fracture behaviour of soft adhesive layers: From bulk to interface, International Journal of Adhesion and Adhesives, v117, Part A, 103180, 2022

6. Qian CHENG, Fan YANG, Han JIANG*, Hongbin CAI, Investigation of the friction reduction and anisotropy of seta structure with large deflection cantilever beam model, Tribology International, v172, 107640, 2022

7. 王丽，朱忠猛，蒋晗*，聚甲基丙烯酸甲酯材料(PMMA)纳米压/划痕变形热恢复的实验研究，实验力学，37(2): 161-174, 2022 

8. 张亮亮，杨帆，蒋晗*，基于缠结微结构的非晶态玻璃态高分子材料屈服行为的分子动力学研究，原子与分子物理学报，39: 026006, 2022

9. Songshan Zeng, Zhuoran Yang, Zaili Hou, Cheonjin Park, Michael D. Jones, Hao Ding, Kuangyu Shen, Andrew T. Smith, Henry X. Jin, Bing Wang, Han JIANG*, Luyi Sun*, Dynamic multi-functional devices enabled by ultrathin metal nanocoatings with optical/photothermal and morphological versatility, PNAS, v119 (4), e2118991119, 2022

2021

1. Zhongmeng Zhu, Yan Xia, Chengkai Jiang, Han JIANG*, Investigation of zero-degree peeling behavior of visco-hyperelastic highly stretchable adhesive tape on rigid substrate, Engineering Fracture Mechanics,  v241, 107368, 2021

2. 朱忠猛，杨卓然，蒋晗*，软材料粘接结构界面破坏研究综述，力学学报, v53(7):1807-1828，2021

3. 杨卓然，张亮亮，孙明艳，周英平，黄姝珂，蒋晗*，锥面管接头界面密封性能研究，润滑与密封，2021，46( 7) : 1-7 

4.  Zhongmeng Zhu, Yan Xia,  Zhuoran Yang, Han JIANG*, Controllable peeling of an elastic strip on a viscoelastic substrate, Engineering Fracture Mechanics, v256, 107990, 2021

5. ZhuoranYang, Zhongmeng Zhu, Yan Xia, Fan Yang,Yuzhou Sun,  Han JIANG*, Modified cohesive zone model for soft adhesive layer considering rate dependence of intrinsic fracture energy, Engineering Fracture Mechanics, v258, 1080892021,2021

6. Wei Zhen Lian, Zhi Wei Fan, Kunpeng Cui, Panchao Yin, Junsheng Yang, Han Jiang, Liqun Tang, Taolin Sun,Tough Hydrogels with Dynamic H‑Bonds: Structural Heterogeneities and Mechanical Performances, Macromolecules 2021 54 (19), 8996-9006

2020

1. Qian Cheng, Han JIANG*, Yonghua Li, Effect of fiber content and orientation on the scratch behavior of short glass fiber reinforced PBT composites, Tribology International, v146,106221,2020

2. Chengkai Jiang, Zhongmeng Zhu, Jianwei Zhang, Zhuoran Yang,Han JIANG*, Constitutive modeling of the rate- and temperature-dependent macro-yield behavior of amorphous glassy polymers, International Journal of Mechanical Sciences,v 179,105653,2020 

3. Zhuoran Yang, Zhongmeng Zhu, Chengkai Jiang, Qian Cheng, Han JIANG*, Mechanism of temperature rise due to crazing evolution during PMMA scratch, International Journal of Solids and Structures,v199,120-130,2020

4. 夏炎，朱忠猛， 蒋晗*, 表面直接氟化改性对有机玻璃弯曲疲劳性能的影响, 固体力学学报,  V41 (1), 71-82, 2020

5. Ke Chen, Chaoming Wang, Tingjun Wang*, Zhongmeng Zhu, Ruiting Ma, Han Jiang, Preparation and performances of form-stable polyethylene glycol/methylcellulose composite phase change materials, Journal of Polymer Research, v27, 199, 2020 

6. Shuai Liu, Sheng Wang*, Shouhu Xuan, Shuaishuai Zhang, Xiwen Fan, Han Jiang, Pingan Song*, and Xinglong Gong*, Highly Flexible Multilayered e-Skins for Thermal-Magnetic-Mechanical Triple Sensors and Intelligent Grippers, ACS Applied Materials and Interfaces, v12(13), 15675–15685, 2020

7. Shuaishuai Zhang, Sheng Wang,Tao Hu, Shouhu Xuan*, Han Jiang, Xinglong Gong*,Study the safeguarding performance of shear thickening gel by the mechanoluminescence method, Composites Part B: Engineering, v 180, 107564, 2020

2019
1. Han JIANG*, Chengkai Jiang, Finite deformation constitutive model for macro-yield behavior of amorphous glassy polymers with a molecular entanglement-based internal-state variable, International Journal of Mechanical Sciences, V161–162, 105064, 2019
2. Zhongmeng Zhu, Chengkai Jiang, Han JIANG*, A visco-hyperelastic model of brain tissue incorporating both tension-compression asymmetry and volume compressibility, Acta Mechanica, v230(6), 2125–2135, 2019
3. Qidi Peng, Zhongmeng Zhu, Chengkai Jiang, Han JIANG*, Effect of stress relaxation on accelerated physical aging of hydrogenated nitrile butadiene rubber using time-temperature-strain superposition principle, Advanced Industrial and Engineering Polymer Research, v2, 61-68,2019
4. Wei Rao, Juan Zhang, Guozheng Kang, Chao Yu, Han JIANG，A meso-mechanical constitutive model of bulk metallic glass composites considering the local failure of matrix, International Journal of Plasticity, V115, 238-267, 2019
5. Chengkai Jiang, Han JIANG*, Jianwei ZHANG, Guozheng KANG, An analytical model of friction behavior during polymer scratch with conical tip, Friction,V7(5), 466–478, 2019 
6. 马俊，王冰，范海冬， 蒋晗*, 基底纹理对镍/铜纳米双层膜刮擦行为影响的分子动力学模拟, 摩擦学学报, 2019, 39(5):577-584
7. Zhongmeng Zhu, Yan Xia, Jian Li, Chengkai Jiang, Han JIANG*, Rate dependent shear debonding between a highly stretchable elastomer and a rigid substrate: delayed debonding and pre-stretch effect, Engineering Fracture Mechanics, V 222, 106743，2019
8. Liu Guangyan, Zhang Ruonan,Yi Yanan, Sun Libin, Shi Li, Jiang Han, Ma Shaopeng*, Experimental and simulation study on stress concentration of graphite components in tension, Mechanics of Materials, v130,88-94,2019

9. Wei Rao, Guozheng Kang, Juan Zhang*, Xi Xie, Han Jiang, Numerical study on toughening mechanism of bulk metallic glass composites from martensite transformation of toughening phase, Journal of Non-Crystalline Solids, v506, 88-97,2019

10. Kaijuan Chen, Guozheng Kang*, Chao Yu, Han JIANG, Effect of crystalline content on ratchetting of ultra-high molecular weight polyethylene polymers: Experimental investigation and constitutive model, Mechanics of Materials, v133, 37-54,2019

2018
1. Jianwei Zhang, Han JIANG*, Chengkai Jiang, Guozheng Kang, Qianhua Kan, Yonghua Li, Experimental and numerical investigations of evaluation criteria and material parameters’ coupling effect on polypropylene scratch, Polymer Engineering and Science, v58(1), 118–122, 2018
2. Han JIANG*, Yaofu Wei, Qian CHENG, Zhongmeng ZHU, Scratch Behavior of Low Density Polyethylene Film: Effects of Pre-stretch and Aging，Materials & Design, v 157, 235-243, 2018
3. Jie Liu, Han JIANG*, Qian Cheng, Chaoming Wang, Investigation of nano-scale scratch and stick-slip behaviors of polycarbonate using atomic force microscopy, Tribology International,125, 59–65, 2018 
4. 魏耀富, 程前，蒋晗*,基底材料和残余预张应力对低密度聚乙烯(LDPE)薄膜刮擦性能影响的实验研究, 实验力学, 33(1): 24-30, 2018
5. 程前，蒋晗*,李永华，洪志豪，乔亮，陈迪，张亮亮，玻璃纤维增强PBT 复合材料刮擦行为研究, 塑料工业 , 46(8): 72-75, 2018
6. Guangyan Liu, Lu Wang, Yanan Yi, Libin Sun, Li Shi, Han JIANG, Shaopeng Ma，Inverse identification of tensile and compressive damage properties of graphite material based on a single four-point bending test, Journal of Nuclear Materials，V509，445--453, 2018
7. Song, Hongxiaia ; Ke, Liaoliang ; Wang, Yuesheng ; Yang, Jie ; Jiang Han，Two-dimensional frictionless contact of a coated half-plane based on couple stress theory, International Journal of Applied Mechanics，v10,n5, 2018
8. Yunpeng Wang, Li Ding, Chunyu Zhao, Sheng Wang, Shouhu Xuan, Jiang Han, Xinglong Gong，A novel magnetorheological shear-stiffening elastomer with self-healing ability, Composites Science and Technology, V168, 303--311, 2018

9. Xiaojuan Zhang,Yanan Yi, Haibin Zhu, Guangyan Liu, Libin Sun, Li Shi, Han Jiang, Shaopeng Ma*，Measurement of tensile strength of nuclear graphite based on ring compression test, Journal of Nuclear Materials,v511, 134-140, 2018

2017
1. Han JIANG*, Jianwei ZHANG, Zhuoran YANG, Chengkai JIANG, Guozheng KANG, Modeling of competition between shear yielding and crazing in amorphous polymers’ scratch, International Journal of Solids and Structures, v124, 215-228, 2017 
2. Zhongmeng ZHU, Yan XIA, Guangguang NIU, Jie LIU, Chaoming WANG, Han JIANG*, Effect of direct fluorination on the mechanical and scratch performance of nitrile butadiene rubber, Wear, v376-377, 1314-1320, 2017
3. 朱忠猛, 蒋晗*, 第21届材料磨损国际会议的总结评述, 摩擦学学报, 2017 , 37 (4) :558-564 
4. Kaijuan Chen, Guozheng Kang, Chao Yu , Han JIANG , H. Jerry Qi , Non-proportional multiaxial ratchetting of ultrahigh molecular weight polyethylene polymer: experiments and constitutive model, Mechanics of Materials, 2017, 112, 76-87
5. Han JIANG*, Chengkai Jiang, Jianwei Zhang, Guozheng Kang, Qianhua Kan, Yonghua Li, New criteria for evaluating the scratch-resistance properties of polypropylene, SPE Plastics Research Online(2017), 10.2417/spepro.006927 

2016
1. Qian CHENG, Chengkai JIANG, Jianwei ZHANG, Zhuoran YANG, Zhongmeng ZHU, Han JIANG*, Effect of thermal aging on the scratch behavior of poly (methyl methacrylate), Tribology International, v101, 110-114, 2016
2. Zhongmeng Zhu, Qian Chen, Chengkai Jiang, Jianwei Zhang, Han JIANG*, Scratch behavior of the aged hydrogenated nitrile butadiene rubber, Wear, v352–353, 155-159, 2016 
3. Kaijuan Chen, Guozheng Kang, Fucong Lu, Jianhang Xu, Han JIANG, Temperature-dependent uniaxial ratchetting of ultra-high molecular weight polyethylene, Fatigue & Fracture of Engineering Materials & Structures, v39(7), 839-849,2016 
4. Fucong Lu, Guozheng Kang, Yilin Zhu, Congcong Xi , Han JIANG, Experimental observation on multiaxial ratchetting of polycarbonate polymer at room temperature, Polymer Testing, v50, 135-144, 2016
5. Jianwei ZHANG, Han JIANG*, Chengkai JIANG, Qian CHENG, Guozheng Kang, In-situ observation of temperature rise during scratch testing of poly (methylmethacrylate) and polycarbonate, Tribology International, v95, 1-4, 2016 
6. Kaijuan CHEN, Guozheng KANG, Chao YU, Fucong LU, Han JIANG, Time-dependent uniaxial ratchetting of ultrahigh molecular weight polyethylene polymer: Viscoelastic-viscoplastic constitutive model, Journal of Applied Mechanics, V83(10), 2016 
7. Hang Li, Guozheng Kang ,Yujie Liu, Han JIANG, Non-proportionally multiaxial cyclic deformation of AZ31 magnesium alloy: Experimental observations, Materials Science and Engineering: A,v671 (1) ,70–81, 2016 
8. Rao Wei, Zhang Juan, Han JIANG, Kang Guozheng, Meso-mechanical constitutive model of bulk metallic glass matrix composites, Mechanics of Materials, 103: 68-77, 2016
9. Chen Kaijuan, Kang Guozheng, Lu Fucong, Chen Jia, Han JIANG, Effect of relative humidity on uniaxial cyclic softening/hardening and intrinsic heat generation of polyamide 6 polymer, Polymer Testing, 56, 19-28, 2016

2015
1. Kaijuan Chen, Guozheng Kang, Fucong Lu, Han JIANG*, Uniaxial cyclic deformation and internal heat production of ultra-high molecular weight polyethylene, Journal of Polymer Research, v22(11):217, 2015 
2. Zhongmeng Zhu, Chengkai Jiang, Qian Chen, Jianwei Zhang, Shaoyun Guo, Ying Xiong, Baoqiang Fu, Wenlong Yang, Han JIANG*, Accelerated aging test of hydrogenated nitrile butadiene rubber using the time-temperature-strain superposition principle, RSC Advances, v5(109), 90178-90183, 2015 
3. Chengkai Jiang, Han JIANG*, Jianwei Zhang, Guozheng Kang, A visco-elastic-plastic constitutive model for uniaxial ratcheting behaviors of polycarbonate , Polymer Engineering and Science, v55(11), 2559-2565, 2015 
4. Chengkai Jiang, Han JIANG*, Zhongmeng Zhu, Jianwei Zhang, Shaoyun Guo, Ying Xiong, Application of Time–Temperature–Stress Superposition Principle on the Accelerated Physical Aging Test of Polycarbonate , Polymer Engineering and Science, v55(10), 2215-2221, 2015 
5. Jianwei Zhang, Han JIANG*, Guozheng Kang, Chengkai Jiang, FucongLu, A new form of equivalent stress for combined axial–torsional loading considering the tension–compression asymmetry of polymeric materials, RSC Advances, v5(89), 72780-72784,2015 
6. Han JIANG*, Qian CHENG, Chengkai JIANG, Jianwei ZHANG, Yonghua LI, Effect of Stick-slip on the Scratch Performance of Polypropylene , Tribology International, v91, 1-5, 2015
7. Jianwei Zhang, Han JIANG*, Chengkai Jiang, Guozheng Kang, Fucong Lu, Accelerated ratcheting testing of polycarbonate using the time-temperature-stress equivalence method, Polymer Testing, v44, 8-14, 2015
8. Congcong Xi, Guozheng Kang, Fucong Lu, Jianwei Zhang, Han JIANG, An experimental study on uniaxial ratcheting of polycarbonate polymers with different molecular weights , Materials and Design, v67, 644-648, 2015
9. 张建伟，熊英，郭少云，蒋成凯，朱忠猛，蒋晗*，丁腈橡胶热处理过程的时间-温度-应力等效性, 高分子材料科学与工程. 2015, 31, 56-9.

Before 2015...
1. Kang Guozheng, Dong Yawei, Liu Yujie, Han JIANG, Macroscopic and microscopic observations on uniaxial ratchetting of two-phase Ti-6Al-4V alloy, Materials Characterization, v92, 26-35, 2014
2.Fucong Lu, Guozheng Kang, Han JIANG, Jianwei Zhang, Yujie Liu,Experimental studies on the uniaxial ratchetting of polycarbonate polymer at different temperatures, Polymer Testing, v39, 92-100,2014
3. Han JIANG*, Jianwei Zhang, Guozheng Kang, Congcong Xi, Chengkai Jiang, Yujie Liu, A test procedure for separating viscous recovery and accumulated unrecoverable deformation of polymer under cyclic loading, Polymer Testing,v32,1445–1451,2013
4. Dong Yawei, Kang Guozheng, Liu Yujie, Han JIANG,Multiaxial ratcheting of 20 carbon steel: Macroscopic experiments and microscopic observations, Materials Characterization,v83,1-12,2013
5. Pan Douxing, Kang Guozheng, Han JIANG, Viscoelastic Constitutive Model for Uniaxial Time-dependent Ratcheting of Polyetherimide (PEI) Polymer, Polymer Engineering & Science, 52(9), 1874–1881,2012
6. Han JIANG, Robert Browning, Peng Liu, T. A. Chang and Hung-Jue Sue, Determination of epoxy coating wet-adhesive strength using a standardized ASTM/ISO scratch test, Journal of Coatings Technology Research, v 8, n 2, 255-263, 2011
7. Mohammad Motaher Hossaina, Han JIANG and Hung Jue Sue,Effect of Constitutive Behavior on Scratch Visibility Resistance of Polymers-A Finite Element Method Parametric Study, Wear, 270,751–759,2011
8. Han JIANG, Browning Robert L., Hossain Mohammad M., Sue Hung-Jue, Fujiwara Mikihiko, Quantitative evaluation of scratch visibility resistance of polymers, Applied Surface Science, v 256, n 21, 6324-6329, 2010
9. Han JIANG , Browning, R., Whitcomb, J.D., Ito, M., Shimouse, M., Chang, T.A., Sue H.-J., Mechanical modeling of scratch behavior of polymeric coatings on hard and soft substrates, Tribology Letters, v 37, n 2, 159-167, 2010
10. Han JIANG, Browning Robert, Sue Hung-Jue,Understanding of scratch-induced damage mechanisms in polymers , Polymer, v50, n 16, 4056-4065, 2009
11. Moghbelii Ehsan ,Sun Luyi, Han JIANG, Boo Woong J., Sue, Hung-Jue , Scratch behavior of epoxy nanocomposites containing α-zirconium phosphate and core-shell rubber particles, Polymer Engineering and Science, v 49, n 3, 483-490, 2009 
12. Han JIANG, Browning Robert, Fincher Jason, Gasbarro Anthony, Jones Scooter, Sue Hung-Jue,Influence of surface roughness and contact load on friction coefficient and scratch behavior of thermoplastic olefins, Applied Surface Science, v 254, n15, 4494-4499, 2008
13. Browning Robert L. , Han JIANG, Moyse Allan, Sue Hung-Jue, Iseki Yuki,Ohtani Kousuke, Ijichi Yasuhito, Scratch behavior of soft thermoplastic olefins: Effects of ethylene content and testing rate, Journal of Materials Science, v43, n 4, 1357-1365, 2008
14. Han JIANG, Lim G.T., Reddy J.N., Whitcomb J.D., Sue H.-J., Finite element method parametric study on scratch behavior of polymers, Journal of Polymer Science, Part B: Polymer Physics, v 45, n 12, 1435-1447, 2007

部分会议论文

Han JIANG, Yonghua Li, Bo Yang, Yan Yang, Zhongfu Luo, Chao Ding,Guangqiang Chen, H.J. Sue, Stick-slip phenomena and its influence on polymer scratch, 11th-Annual SPE TPO Conference, 2010
Yonghua Li, Bo Yang, Yan Yang, Zhongfu Luo, Chao Ding,Guangqiang Chen, Han JIANG, Study of scratch performance of polypropylene based automotive material, 11th-Annual SPE TPO Conference, 2010 
R.L. Browning, P. Liu, Han JIANG, M. Hossain, and H.-J. Sue, A Comparative Study of Scratch Visibility Assessment Between Erichsen Delta L and ASTM/ISO Methods, 11th-Annual SPE TPO Conference, 2010 
Han JIANG, R.Browning, B.T.A. Chang, H.J.Sue, A new approach for determination of wet adhesive strength of epoxy coatings on steel substrate, NACE International - Corrosion 2010 Conference and Expo. 2010 
Browning, Robert L., Han Jiang, Liu, Peng, Moyse, Allan, Sue, Hung-Jue,Recent progress in scratch & mar testing and evaluation of thermoplastic olefins International Polyolefins Conference 2010, 2010, 
Browning, Robert Lee,Han JIANG, Song, Yishu, Sue, Hung-Jue, Ito, Motoko, Fujiwara, Mikihiko, Gasbarro, Anthony,A new method for abrasion resistance measurement of thermoplastic olefins, 67th Annual Technical Conference of the Society of Plastics Engineers - ANTEC, Conference Proceedings, v 2, 908-913, 2009
Han JIANG, Whitcomb John D., Sue Hung-Jue Mechanical modeling of scratch induced periodic damage, 11th-Annual SPE TPO Conference, 2009
Chang Benjamin T. A. , Sue Hung-Jue, Han JIANG, Browing Bobby,Wong Dennis, Pham Ha, Guo Shu, Kehr Al, Mallozzi Meghan, Snider William, Siegmund Al,Integrity of 3LPE pipeline coatings - Residual stresses and adhesion degradation, Proceedings of the Biennial ASME International Pipeline Conference, IPC, v2, 75-86, 2009
Browning Robert Lee ,Han JIANG, Moyse Allan, Sue Hung-Jue, Lau Edmund, Quantitative abrasion evaluation of thermoplastic olefins, International Polyolefins Conference - FLEXPACKCON 2008, v 3, 1703-1707, 2008
Han JIANG, Browning Robert L., Sue,Hung-Jue, Automated quantitative scratch visibility determination based on ASTM D7027-05 test method, Automotive TPO Global Conference, p 436-443, 2008
Browning R.L., Lim G.-T., Han JIANG, Moyse A., Sue H.-J., Chen H., Earls J., White J. Scratch behavior of polymer coatings, Society of Plastics Engineers Annual Technical Conference - ANTEC, Conference Proceedings, v 1, p 37-40, 2006
Han JIANG, Browning R., Moyse A., Sue H.-J. , Effects of surface texture and surface roughness on polymer scratch behavior, Society of Plastics Engineers Annual Technical Conference – ANTEC Conference Proceedings, v 3, p 1503-1507, 2007
Han JIANG , Lim G.T., Ready J.N., Whitcomb J.D., Sue H.-J., Parametric study on scratch behavior of ploymers, Society of Plastics Engineers Annual Technical Conference - ANTEC, Conference Proceedings, v 1, 50-54, 2006
Browning R.L. , Lim G.T., Han JIANG, Moyse A., Moghbelli E., Sue H.-J. ,AE integrated approach to study scratch behavior of TPOs, International Conference on Polyolefins 2006, v 2, 527-531, 2006
Browning, R. , Lim G., Han JIANG, Sue H.-J. , Scratch behavior of anisotropic polypropylene surfaces, Automotive Thermoplastic Polyolefins (TPO) Global Conference , v 2006, 422-430, 2006
Chang B.T.A. , Han JIANG, Sue H.-J., Guo S., StJean G., Pham H., Wong D., Kehr A., Mallozzi M., Lo K.H., Disbondment mechanism of 3LPE pipeline coatings, 17th International Conference on Pipeline Protection, 247-256, 2007
Browning Robert Lee , Han JIANG, Moyse Allan, Sue Hung-Jue, Lau Edmund, Mar behavior of thermoplastic olefins, Society of Plastics Engineers Annual Technical Conference - ANTEC,Conference Proceedings, v 1, p 255-259, 2007
Browning R., Han JIANG, Lim G.-T., Moyse A., Sue H.-J.,Evaluation and modeling of scratch resistance of polymers, Source: Society of Plastics Engineers Annual Technical Conference - ANTEC, Conference Proceedings, v 2, 728-730, 2006