Polishing path generation for physical uniform coverage of the aspheric surface based on the Archimedes spiral in bonnet polishing

影响因子：2.6

DOI码：10.1177/0954405419838655

发表刊物：PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE

关键字：Bonnet polishing ；polishing path planning； physical uniform coverage ；aspheric surface； contact model ；TOOL ；OPTIMIZATION ；OXIDATION ；MECHANISM； CARBIDE

摘要：As a new polishing method, bonnet polishing is suitable for polishing the curved surface due to its advantages in flexibility and adaptability of the polishing tool. In the polishing process, the contact state between the bonnet and the curved surface always changes. The traditional polishing tool path with equal interval will inevitably lead to over-polished areas and unpolished areas. In this article, a new tool path for bonnet polishing, which is called the revised Archimedes spiral polishing path, is proposed to ensure the physical uniform coverage of the curved surface in bonnet polishing. The path generation method is based on the modified tool-workpiece contact model and the pointwise searching algorithm. To prove the effectiveness of the revised path, two aspheric workpieces were polished along the traditional Archimedes spiral polishing path and the revised path, respectively. The roughnesses of the two workpieces are 10.94 and 10nm, and the profile tolerances are 0.4097 and 0.2037 mu m, respectively. The experimental results show that the revised path achieves lower roughness and surface tolerance than the traditional Archimedes path, which indicates that the revised path can achieve uniform physical coverage on the surface.

论文类型：SCI

论文编号：20191406717266

卷号：233

期号：12

页面范围：2251-2263

ISSN号：0954-4054

是否译文：否

发表时间：2019-10-01

收录刊物：SCI、EI

发布期刊链接：https://doi.org/10.1177/0954405419838655